Lumenier LUX F765 Flight Controller 30x30mm - NDAA

The Lumenier LUX F765 Flight Controller is your ultimate solution for high-performance multirotor builds, offering robust features and seamless compatibility with Betaflight, Ardupilot, and PX4. Its NDAA-compliant design ensures reliability and security for professional and recreational pilots alike. Check out all our 30x30mm Flight Controllers and the rest of our Lumenier Products! Features Supported Firmware - Betaflight, Ardupilot, and PX4 NDAA compliant and designed in the USA Blackbox Storage - SD Card and Flash I2C Ports for External Sensors 10V Regulator for VTX Power 5V Regulator for Accessories Analog Current Sensor Input Analog Battery Sensor Input CANbus Support (PX4 only) Integrated BetaFlight OSD Camera Control Output LED Strip Control USB Type-C (2.0) 8 UART Ports Specifications Processor: MCU STM32F765, 216MHz, 512KB RAM, 2MB Flash OSD (On Screen Display): Integrated analog BetaFlight OSD Sensors: Built-in Gyro, Accelerometer, and Barometer Power Supply: 3S to 6S Battery Voltage Weight: 9g LED Indicators: 2x LEDs for Status (3.3V Power and Firmware Indicator) Power Regulators: Analog Inputs: 2x ADC (VBAT and Current) Camera Support: 1x Camera Input +10V Regulator for VTX +5V Regulator Mounting: Holes: 30.5mm x 30.5mm Dimensions: 38x38x4mm Outputs: 12x Motor/Servo Outputs LED Strip Control Buzzer Output Storage: Flash Storage: 128Mb SD Card Slot Ports: 1x External I2C Port USB Type-C (2.0) 1x CANbus Port 8x UART Ports IMPORTANT NOTES: When using Ardupilot or PX4 builds, an sdcard is required to boot after firmware install. Links MANUAL Lumenier LUX F765 FC Manual NDAA DECLARATION Lumenier NDAA Product Declaration - LUX F765 Flight Controller FIRMWARE PX4: 002_LUXNDAAF7_PX4_v1.15.4.px4 002_LUXNDAAF7_PX4_bl.hex (PX4 Bootloader) Betaflight: 001_Betaflight_4.5.1_STM32F745_LUXNDAAF7.hex Ardupilot: 001_LUXNDAAF7_arducopter_v4.5.7_with_bl.hex Package Includes 1 x Lumenier LUX F765 Flight Controller - NDAA 1 x 63mm 8 pin JST-SH Cable 1 x 23mm 8 pin JST-SH Cable 1 x 64mm 6 pin JST-SH Cable 1 x 75mm 4 pin JST-SH Cable 4 x M3 Rubber Grommets