Atomic Barra Weld On Rocker Cover Fitting Kit

Atomic "Stealth" Breather Fitting System Race-Spec Crankcase Ventilation. Factory-Spec Fitment. Is your Barra a bit blocked up? High-horsepower Barra engines need massive crankcase ventilation to prevent blown seals, but welding on fittings often means hacking up your engine cover or ruining the clean OEM look of your engine bay. The Atomic Solution The Atomic "Stealth" System. This is the only weld-on solution designed specifically to fit perfectly under the standard plastic garnish while delivering massive -10AN flow. Zero interference: Fits under the factory cover. Precision Jigging System included in every kit. 2. The Jig-Locating System We removed the guesswork. Every kit includes our proprietary positioning jigs that lock into existing rocker cover features. Precision Placement: The jigs bolt or clip into factory holes, holding the weld-on bung in the exact coordinate needed. Foolproof Welding: Simply install the jig, drop in the aluminium bung, tack weld, remove the jig, and finish welding. FG Dual Jig: Includes separate jigs for Front and Rear fittings. BA/BF Single Jig: Includes a jig for the critical rear fitting (front is positioned visually). 3. Atomic x Speedflow Engineering This isn't an off-the-shelf adapter. We partnered with Speedflow to engineer a bespoke extension fitting specifically for this application. Part Number: Z-MC-920-10-L-BLK Custom Low-Profile Design: Shorter than a standard extension, critical for clearing the garnish. Slim enough to fit the rocker cover garnish without cutting* Seamless Integration: Designed to mate perfectly with our -10AN ORB weld-on bungs. Australian Made: Manufactured to the same high standards as your engine. Choose Your Kit DIY Kit (Standard) Ideal for: One-off engine builds. 2x -10AN ORB Weld-On Bungs 2x Atomic/Speedflow Extension Fittings 1x Set of Plastic Positioning Jigs Trade Master Kit Ideal for: Fabrication workshops. 5x Sets of Fittings & Extensions 1x Set of Billet Aluminium Jigs Reusable for Life Refill Kit Ideal for: Repeat builds (Jig owners). 2x -10AN ORB Weld-On Bungs 2x Atomic/Speedflow Extension Fittings (No Jigs Included) Tech Specs Application: Ford Barra (BA, BF, FG variants available) Material: 6061-T6 Aluminium (Fittings) / PLA (DIY Jigs) Fitting Size: -10AN ORB *BA/BF Note: Requires drilling down the factory breather tower for rear fitting clearance. This can be done using a large drill bit ~12mm to create a larger breather hole and flat welding surface. Application Specifics For FG Series (Dual Jig System) The Process: Includes 2x Positioning Jigs that bolt into existing holes on the cover. They lock the weld-on fittings in place for tacking. No Cutting: The custom Speedflow fittings sit perfectly under the standard plastic cover position—no cutting of the plastic garnish required. For BA/BF Series (Single Jig System) The Process: Includes 1x Positioning Jig for the critical rear fitting. The front fitting has ample clearance and can be positioned visually. Note: Requires milling or drilling down the factory breather tower (easily done with a ~12mm drill bit) to create a flat surface and larger vent hole. *Note that the rear of the plastic cover will be raised approx 2mm. ⚠️ Important Notes CLEAN INTERNAL BAFFLES OF ROCKER COVER THOROUGHLY BEFORE RE-INSTALLATION ON ENGINE. Debris Warning: Drilling and welding on engine parts causes engine-destroying debris. You are responsible for inspecting, cleaning, and properly installing these parts and any other parts involved in this modification. Warranty: No warranty given beyond parts provided. Fitment: BA and BF plastic covers will sit approx 2mm higher than factory at the rear. Add to Cart