AC Infinity CLOUDRAY S6 2-Pack 6in Clip Fan | 325 CFM, 10 Speeds

The CLOUDRAY S6 2-Pack (SKU: AC-CCX6) is a dual-unit atmospheric circulation system engineered for enclosed cultivation environments, replacing single-speed clip fans and manual airflow management with programmable, UIS-integrated atmospheric control. Outcome: Consistent, programmable airflow across the full canopy zone with 10 speed levels, 10 dynamic wind modes, and 10 oscillation settings per unit Replaces: Fixed-speed clip fans, manual repositioning routines, and unintegrated circulation hardware Environment: Enclosed cultivation tents and controlled-environment grow spaces requiring precision atmospheric management FACTORY-AUTHORIZED DEALER — CANNAFULL SPECTRUM SOLUTIONS Deployed in licensed commercial facilities across the United States. Quick Spec: 6.5" impeller | 325 CFM | 31 dBA | 12W / 0.14A | 100–240V AC | IP54 | 67,000-hour rated | ETL Listed (#5027708) | UIS Compatible Precision Control in Any Space The enemy is guesswork — and in a sealed cultivation environment, guesswork compounds silently. A fan locked at one speed creates stagnant zones the moment canopy density shifts. A unit with no oscillation control either hammers a single node or misses entire rows entirely. When the only adjustment available is physically repositioning the hardware, every environmental correction costs labor time, introduces handling risk, and still delivers no guarantee of uniformity. The result is a circulation profile that drifts out of calibration with every growth stage, and an operator who is managing equipment instead of managing outcomes. After deployment, the picture changes. Both units in the 2-pack are positioned once and left to execute. Speed ramps up or down automatically in response to UIS controller triggers tied to temperature and humidity thresholds. Dynamic wind modes cycle through variable airflow patterns that replicate natural outdoor conditions, eliminating the static pressure differentials that cause uneven transpiration and localized moisture accumulation. Oscillation sweeps are dialed to the exact angular range that covers the canopy without contacting tent walls. The operator sets the parameters; the ecosystem maintains them continuously, around the clock, without manual intervention. The mechanism behind that outcome is a redesigned brushless EC motor — larger in physical footprint than standard clip fan motors — built around carbon steel gears and dual ball bearings rated for omnidirectional mounting. The 6.5" impeller moves 325 CFM at a measured 31 dBA noise floor, operating against 25 Pa of static pressure across a 100–240V AC input range. Ten discrete speed levels, ten dynamic wind modes, and ten oscillation settings with an angular sweep range of 10° to 90° (head tilt: 30° up, 40° down) give the operator a control matrix of 1,000 addressable airflow states per unit. The IP54 ingress protection rating keeps moisture and particulate out of the motor housing across operating conditions spanning 35–85% RH and 32–140°F. At 12W draw and 0.14A current, two units running continuously represent a negligible electrical load. In practical terms, the CLOUDRAY S6 2-Pack delivers 325 CFM per unit at 31 dBA across a fully programmable 10-speed, 10-mode, 10-oscillation control matrix, drawing 12W at 0.14A per unit on any 100–240V AC circuit. Where This Belongs (and Doesn't) Electrical installation must comply with all applicable local codes. Consult a licensed electrician for circuit load calculations in multi-unit deployments. This product is not rated for outdoor or unenclosed wet-location use beyond its IP54 ingress protection specification. Optimal Deployment Environments Enclosed grow tents requiring staged atmospheric control across veg and flower cycles Multi-tier canopy configurations where fixed-angle fans create dead zones UIS-integrated facility ecosystems requiring automated climate response Spaces where noise floor management is operationally relevant (31 dBA rated) 100–240V AC environments — universal voltage compatibility, no transformer required Not Recommended For Open-air or outdoor installations beyond IP54 protection parameters Environments exceeding 140°F operating temperature or 85% RH sustained Applications requiring airflow volumes beyond 325 CFM per unit without supplemental circulation hardware Installations where UIS controller integration is unavailable and full automation capability is required How It Works The CLOUDRAY S6's performance architecture begins at the motor. The Advanced 35MM brushless EC motor is physically larger than the motors found in standard clip fan designs — a deliberate engineering decision that increases thermal mass, reduces rotational stress on internal components, and extends oscillation mechanism lifespan. Carbon steel gears transmit torque from the motor to the oscillation drive train without the flex or wear degradation associated with polymer gear sets. Dual ball bearings support the impeller shaft in both horizontal and vertical mounting orientations, maintaining rotational precision regardless of how the unit is positioned on the clip mount. The 6.5" impeller generates 325 CFM of maximum airflow against 25 Pa of static pressure — the resistance figure that determines whether a fan maintains output when air paths are partially obstructed by canopy density or structural elements. At 31 dBA, the acoustic output is low enough to operate continuously in environments where noise management is a factor. The 96-inch (8-foot) cord provides positioning flexibility across standard tent configurations without requiring extension hardware. The control architecture operates across three independent axes. Speed is adjustable across 10 discrete levels. Dynamic wind mode selection across 10 programmed patterns introduces variable velocity cycling that prevents the static pressure differentials associated with constant-speed operation. Oscillation is independently configurable across 10 levels within a 10°–90° angular range, with head tilt adjustable 30° upward and 40° downward from neutral. These three axes are accessible via onboard LED-indicated controls and, when paired with a UIS controller, via WiFi app, climate triggers, scheduling timers, and cycle automation. The IP54 rating seals the motor housing against moisture ingress and particulate contamination across the full 35–85% RH and 32–140°F operating envelope. In practical terms, the CLOUDRAY S6 2-Pack delivers a three-axis control matrix — 10 speeds, 10 wind modes, 10 oscillation levels — from a 12W, 0.14A motor platform rated to 67,000 hours of continuous operation. Commercial Assurance The CLOUDRAY S6 2-Pack is sold through Cannafull Spectrum Solutions as a factory-authorized dealer. Every unit is covered under the manufacturer's warranty as specified in the product documentation included with shipment. Warranty terms are determined by the manufacturer; contact Cannafull Spectrum Solutions at the address below to initiate a warranty claim or verify current coverage terms prior to purchase. ETL Listed: Certificate #5027708 — independently verified to applicable safety standards IP54 Rated: Dust and moisture ingress protection confirmed for enclosed cultivation environments 67,000-Hour Motor Rating: Dual ball bearing, brushless EC motor platform rated for continuous operation UIS Certified Compatible: Verified integration with UIS controller ecosystem for automated deployment Universal Voltage: 100–240V AC input — operates on standard U.S. circuits without voltage conversion System Integration UIS Controller Ecosystem: Both units in the 2-pack are UIS-compatible, enabling WiFi app control, temperature and humidity climate triggers, scheduling timers, and cycle automation through a single controller interface Atmospheric Control Layering: The 10-speed, 10-mode, 10-oscillation control matrix integrates with UIS environmental data to automate airflow response to real-time canopy conditions without operator intervention Universal Voltage Compatibility: 100–240V AC input allows deployment alongside any standard facility electrical infrastructure without transformer or step-down hardware Omnidirectional Mounting: Dual ball bearings support horizontal and vertical clip mounting, enabling positioning on tent poles, frame rails, or structural supports at any angle without performance degradation Scalable Deployment: Two-unit pack format allows simultaneous dual-zone coverage from a single purchase, with additional units expandable within the same UIS controller network Facility Integration Data The following table models electrical load and acquisition cost across standard multi-unit deployment configurations based on published specifications of 12W per unit and MAP pricing of $119 per 2-pack. Fleet Size (Units) 2-Packs Required Total Draw (W) Daily kWh (24hr) Acquisition Cost (MAP) 10 Units 5 packs 120W 2.88 kWh $595 20 Units 10 packs 240W 5.76 kWh $1,190 50 Units 25 packs 600W 14.40 kWh $2,975 Electrical load calculations based on 12W per unit at continuous 24-hour operation. Actual facility load will vary based on speed setting and duty cycle. kWh cost not included — apply local utility rate for operating cost projection. Acquisition cost based on MAP of $119 per 2-pack; volume pricing may be available through Cannafull Spectrum Solutions. Operator Field Notes Oscillation Angle Precision: The 10-level oscillation system allows the operator to set minimum sweep at 10° for targeted single-node airflow or expand to 90° for full-width canopy coverage — critical for avoiding tent wall contact in compact enclosures Dynamic Wind Mode Selection: The 10 programmed wind modes introduce variable velocity cycling that prevents the static pressure buildup associated with constant-speed fans; select modes that match the transpiration demand of the current growth stage Mounting Orientation: Dual ball bearings support both horizontal and vertical clip mounting without bearing wear penalty — position units on vertical poles for lateral sweep or horizontal rails for downward canopy penetration UIS Integration Sequence: Pair both units to the UIS controller before finalizing physical placement; confirm climate trigger thresholds and scheduling parameters are active before closing the tent for an unattended run cycle Cord Management: The 96-inch (8-foot) cord provides sufficient reach for most standard tent configurations; route cord along frame rails to prevent contact with canopy and reduce tripping hazard during access Continuous Operation Rating: The Advanced 35MM step motor technology supports 24-hour continuous operation; the 67,000-hour life expectancy rating assumes sustained duty cycle — do not cycle power unnecessarily as thermal cycling is a primary wear mechanism in brushless motor systems Operator FAQ Q: Does the CLOUDRAY S6 2-Pack require a UIS controller to operate, or does it function as a standalone unit? A: The CLOUDRAY S6 operates fully as a standalone unit. All 10 speed levels, 10 dynamic wind modes, and 10 oscillation settings are accessible via onboard controls with LED speed indicators. UIS controller pairing is optional and adds WiFi app control, climate triggers, scheduling timers, and cycle automation — but is not required for basic operation. Q: What is the difference between the 10 speed levels and the 10 dynamic wind modes? A: Speed levels set a fixed output velocity — level 1 through 10 represent discrete, constant airflow rates up to 325 CFM maximum. Dynamic wind modes introduce programmed velocity variation patterns that cycle the fan speed automatically to simulate variable outdoor airflow conditions. Wind modes are used when consistent static pressure from a fixed speed setting is undesirable — for example, during stages where transpiration uniformity across the canopy is the priority. Q: Can both units in the 2-pack be controlled independently, or do they operate as a synchronized pair? A: Each unit in the 2-pack is an independent device with its own onboard controls. When paired to a UIS controller, each unit can be assigned to separate control channels, allowing independent speed, mode, and oscillation programming per unit. This enables asymmetric airflow configurations — for example, one unit running a dynamic wind mode at mid-range oscillation while the second holds a fixed speed at narrow-angle targeted output. Q: What does the IP54 rating mean in practical terms for a humid cultivation environment? A: IP54 indicates the motor housing is rated for protection against dust ingress sufficient to prevent operational interference (IP5x) and protection against water splashing from any direction (IPx4). In a cultivation environment operating within the specified 35–85% RH range, this means condensation, foliar spray drift, and ambient moisture will not compromise motor integrity under normal operating conditions. IP54 does not qualify the unit for direct water spray or submersion. Q: What is the 67,000-hour life expectancy based on, and does it apply to the oscillation mechanism as well as the motor? A: The 67,000-hour life expectancy is the manufacturer's rated figure for the CLOUDRAY S6 2-Pack (SKU: AC-CCX6) and reflects the dual ball bearing, brushless EC motor platform. The motor was specifically redesigned in physical size and construction to extend oscillation mechanism lifespan — the carbon steel gear set in the oscillation drive train is a direct response to the wear failure mode common in polymer-gear clip fan designs. The 67,000-hour figure represents the combined system rating under continuous operation conditions. Q: Is the CLOUDRAY S6 2-Pack compatible with 240V circuits, or is a step-down transformer required? A: The CLOUDRAY S6 operates on 100–240V AC input natively. No step-down transformer or voltage converter is required for operation on standard U.S. 120V or 240V circuits. Verify that the outlet configuration and plug type are compatible with your facility's electrical infrastructure before installation. Circuit load calculations for multi-unit deployments should be reviewed by a licensed electrician. Shipping & Logistics Shipping Territory: Cannafull Spectrum Solutions ships within the contiguous 48 United States only. Orders to Alaska, Hawaii, U.S. territories, and international destinations cannot be fulfilled through this listing. Fulfillment Timeline: In-stock orders typically ship within 1–3 business days. Tracking information will be provided via the email address on file at time of order. Delivery timelines vary by carrier and destination. Returns: Returns are accepted subject to the conditions outlined in the Cannafull Spectrum Solutions Return Policy. Items must be in original, uninstalled condition with all original packaging. Defective units are handled separately under manufacturer warranty procedures. Restocking Fee: Returns of non-defective items are subject to a restocking fee of up to 25% per our Return Policy. Review full terms at cannafullspec.com/pages/return-policy before ordering. Questions about your order: Contact Cannafull Spectrum Solutions directly via the contact page at cannafullspec.com before initiating a return or warranty claim. What's in the Box 2x CLOUDRAY S6 6" Clip Fan units (SKU: AC-CCX6) 2x Clip mounting assemblies (one per unit) 2x Power cords, 96 inches (8 feet) each Manufacturer documentation and warranty information Note: Box contents are based on manufacturer specifications for SKU AC-CCX6. UIS controllers, mounting accessories beyond the included clip, and supplemental automation hardware are sold separately. Verify box contents against the manufacturer's packing list upon receipt. Contact Cannafull Spectrum Solutions immediately if any component is missing or damaged prior to installation. Regional Compliance & Deployment Notes ETL Certification: The CLOUDRAY S6 2-Pack carries ETL Listed certification, Certificate #5027708, verifying compliance with applicable U.S. electrical safety standards. ETL listing is recognized by authorities having jurisdiction (AHJ) across licensed U.S. facilities. Electrical Code Compliance: Installation must comply with the National Electrical Code (NEC) and all applicable state and local electrical codes. Multi-unit deployments should be reviewed by a licensed electrician for circuit load and branch circuit compliance prior to energizing. Licensed Facility Use: Operators deploying this equipment in state-licensed cultivation facilities are responsible for ensuring that all environmental control equipment meets the compliance requirements of their applicable state regulatory program. ETL listing supports but does not guarantee regulatory approval in all jurisdictions. Shipping Jurisdiction: This product is available for shipment within the contiguous 48 United States only through Cannafull Spectrum Solutions. Cannafull Spectrum Solutions does not ship to Canadian provinces or international destinations. Voltage Compliance: The 100–240V AC operating range is compatible with standard U.S. residential and commercial electrical infrastructure. Confirm outlet configuration and circuit capacity before installation in any facility environment. Compliance information is provided for reference only and reflects specifications published by the manufacturer at time of listing. Cannafull Spectrum Solutions makes no representation regarding the suitability of this product for any specific regulatory jurisdiction beyond the ETL listing noted above. Operators are solely responsible for verifying compliance with all applicable federal, state, and local regulations governing cultivation facility equipment. Specifications subject to change by manufacturer without notice; confirm current specifications with Cannafull Spectrum Solutions prior to large-volume procurement.