Merrick Fluted Glass Bell Wall Lamp

SevernLighting The Merrick Fluted Glass Bell Wall Lamp hangs a ribbed glass bell from a short brass arm on a round backplate, with a knurled key switch standing out at the socket. The glass is fluted down its full height and flares at the rim, so light leaves through dozens of fine vertical ribs rather than one flat surface. FIXTURE DETAILS Every part is stripped to essentials — a disc, a straight arm, an elbow, a shade — with the brass left plain so the pattern in the glass does the work. It projects under seven inches from the wall, which keeps it clear of a mirror, a cabinet door or a narrow passage. Better Together For a collected, designer-styled room, pair it with matching pieces like the Marlowe Speckled Glass Pendant Lamp. Measures ∅ 5.7″ × H 10.2″ in brass and clear glass, for hardwired wall installation. Takes one E26/E27 bulb (not included; a 3000K warm white suits it best). *2 SET OF 2 What "Set of 2" Means Two complete lights, each with its own hardware, shipped together in one order. ☰ Specifications Design & Material MaterialBrass, Glass FinishGold Lampshade ColorTransparent Electrical Light Source BaseE26 or E27 Rated VoltageAC 110–120V WiringHardwired Installation & Rating MountingWall Moisture ResistanceIP20, indoor use ProcessCutting Control Method Push-button switch (not dimmable) Dimensions Size (cm) Dia 14.5 cm x H 26 cm x W 17 cm Size (inch) ∅ 5.7″ x H 10.2″ x W 6.7″ ✦ Where It Fits Best Light through dozens of fine glass flutes — plain brass, patterned glass. ★ Best Fit Flanking a Vanity Mirror A pair set either side at face height lights both cheeks evenly, which is the one thing an overhead fixture cannot do. Under seven inches of projection keeps the bells clear of the mirror edge, and the key switch at the socket means you turn each one on where you stand. Where it looks its very best. Also Shines In Kitchen Wall Beside open shelves or a window. Narrow Hallway Shallow enough to walk past. Over the Bedside A reading light off the table. Finding Your Fit At Ø 5.7″ × H 10.2″ with a 6.7″ projection, Merrick is small enough to use in pairs without crowding a wall. Flanking a mirror, set the backplates 36–40″ apart with the centre of the glass around 62–66″ from the floor, which puts the light at face height. The shallow projection is what lets it live in a passage, beside a cabinet door, or close to the edge of a mirror. Good to Know SizeØ 5.7″ × H 10.2″ Projection6.7″ from the wall WiringHardwired, key switch DETAILS MATTER What Makes It Special 01 Plain Brass Against Patterned Glass One round plate, one straight arm, one elbow — no scroll, no trim, no visible fixings. The metal stays quiet so the ribbing in the glass carries the fixture. 02 A Tiered Bell, Not a Cone The shade steps in at the shoulder, widens through the body and flares again at the rim, so the outline has three distinct changes of direction instead of one straight taper. 03 Fluted Glass Breaks the Light Up The ribs run the full height of the shade, so light leaves as a row of fine vertical highlights and throws a fanned pattern onto the wall — texture in the glass doing what a plain shade can't.