Kinetic Green Jumper Cable - Amphenol 2+4 to Chagori 2+4 (CAN) - Direct Battery Charging Extension

Charging extension jumper for Kinetic Green electric scooters — connects your Kinetic Green charger directly to the battery, bypassing the scooter’s internal charging harness. One end is an Amphenol 2+4 male connector that plugs into the battery’s Amphenol 2+4 female socket; the other end is a Chagori 2+4 female connector that accepts the charger’s Chagori 2+4 male plug. CAN data lines are carried through, so the charger and BMS continue to communicate normally during charging. When you need this: When the scooter’s internal charging cable or harness is damaged and you need to charge the battery directly When servicing or bench-testing a battery pack outside the scooter As a diagnostic tool to isolate the scooter harness from the charging circuit Compatible Models: Kinetic Green Flex (84V) · Kinetic Green Zulu (67.2V) · Kinetic Green Zing HSS (67.2V) · Kinetic Green E-Luna (58.8V) — all models that use an Amphenol 2+4 socket on the battery and a Chagori 2+4 male charger connector. Important: This jumper connects the charger directly to the battery — use only with the correct Kinetic Green charger for your model’s voltage. Do not use a Flex 84V charger on a Zulu/Zing 67.2V battery or vice versa. Key Highlights: Origin: Made in India Delivery: 3–10 Days ⚠️ This is a spare part — not eligible for return or replacement once dispatched. Please verify compatibility before ordering. Specifications: Battery-side connector: Amphenol 2+4 Male Charger-side connector: Chagori 2+4 Female (CAN) Cable length: 6 inches (~15 cm) CAN data lines: Yes — full 6-wire CAN configuration Compatible with: All Kinetic Green CAN chargers (Chagori 2+4 male plug) Safety: Ensure the charger is switched OFF before connecting this jumper. Match the charger voltage to your battery — do not use a Flex 84V charger on a Zulu/Zing 67.2V battery or vice versa. Keep away from water and moisture during use.