Anycubic Wash & Cure 3 Max

Anycubic Wash & Cure 3 Max: Professional Post-Processing for Large-Format Resin Prints The Anycubic Wash & Cure 3 Max is a 2-in-1 wash and cure station built for makers who print large resin models and need fast, clean, and consistent post-processing results. This isn't a printer — it's the machine that handles the final stage of your resin workflow, right after pulling your model off the resin 3D printer. Fresh off the build plate, every resin print is coated in uncured liquid resin — sticky, skin-irritating, and damaging to surface detail. That's why every resin model requires two essential steps: washing away uncured resin with isopropyl alcohol or a dedicated wash solution, then curing under UV light so the part reaches its full hardness and mechanical strength. The Wash & Cure 3 Max automates both steps in a single unit, with an XXL 15.1-liter tank designed for models too large for standard wash and cure stations. How It Works: Washing and Curing in One Machine The wash cycle combines solvent immersion with a 360° spray system and dedicated cleaning of the basket's underside. This triple-action approach ensures uncured resin is fully removed — even from complex geometries, internal cavities, and flat surfaces where residue tends to hide. Thanks to this design, solvent consumption drops to just a few milliliters per cycle, delivering over 50% savings on IPA compared to manual washing methods. For curing, the Wash & Cure 3 Max features a 360° rotating turntable surrounded by 20 × 405 nm LEDs powered by a 120 W source, reaching a power density of up to 25,000 μW/cm² at 18 cm. Continuous rotation exposes every surface of the model to UV light evenly, eliminating soft spots or under-cured areas. A flexible gooseneck UV light is also included for targeted curing of specific details. Choose from three operating modes: AUTO (wash + cure in sequence, adjustable from 13 to 42.5 min), WASH (wash only, 10 to 39.5 min), and CURE (cure only, 0.5 to 30 min) — all controlled via an intuitive touchscreen panel. Capacity and Compatibility The standout feature of this Max version is its 15.1-liter capacity, with a working volume of up to 305 × 165 × 300 mm. It handles large single prints or multiple models at once, supporting center loads of up to 3 kg while maintaining smooth, stable rotation. Compatible with most large-format LCD resin printers with build plates up to 13.6" — including models like the Photon Mono M7 Max and Photon M3 Max, among others. You can insert the entire build plate with the print still attached, or place already-removed models directly into the wash basket.Key Features 15.1 L XXL wash tank for large prints and batch processing. 360° spray washing + immersion + bottom cleaning for a thorough, complete clean. 360° rotating UV curing with 20 x 405nm LEDs and 120W of power. AUTO, WASH, and CURE modes with fully adjustable timers. Save over 50% on IPA thanks to the optimized basket design. Touch panel and smart monitoring that alerts you if the lid is open, fluid level is low, there's a blockage, or voltage drops. What's in the Box? The package includes the Wash & Cure 3 Max main unit, wash tank/basket, rotating curing platform, gooseneck auxiliary light, UV-protective cover, and instruction manual. You'll also need isopropyl alcohol and post-processing accessories to get started. Who Is It For? The Wash & Cure 3 Max is designed for advanced makers, workshops, figure painting studios, and small businesses that print large or high-volume parts and need consistent, hands-free post-processing. If you work with large-format resin printers and want a professional finish on every model, this machine will save you both time and solvent. Pair it with water-washable resins to skip the IPA altogether, or use it with your favorite standard 3D resins. Explore the full range of Wash & Cure machines in our store. Specifications Function Wash & Cure (2-in-1) Wash capacity 15.1 L Max. print size 305 × 165 × 300 mm Curing LEDs 20 x 405nm LEDs UV power 120W · up to 25,000 μW/cm² at 18 cm Curing rotation 360° rotating platform AUTO mode 13 – 42.5 min (adjustable) WASH mode 10 – 39.5 min (adjustable) CURE mode 0.5 – 30 min (adjustable) Max. center load 3 kg IPA savings >50% Dimensions 434 × 434 × 556 mm Weight 13.5 kg Compatibility LCD printers up to 13.6" (Photon Mono M7 Max, M3 Max, etc.) Frequently Asked Questions Why do resin prints need to be washed and cured? Fresh off the printer, resin prints are covered in uncured liquid resin. Washing removes this tacky, toxic residue, while UV curing completes the polymerization process so your model reaches its final hardness, stability, and strength. Skip these steps and your print will remain soft, sticky, and lacking in fine detail. What liquid should I use to wash resin prints? The most common choice is isopropyl alcohol (IPA) at 95–99% concentration. If you'd rather avoid solvents, water-washable resins can be cleaned with plain water — a safer, more convenient option for home use.How long does resin need to cure? It depends on the size, resin color, and UV power of your curing station. As a general rule, a few minutes is usually enough for small or translucent parts, while larger or opaque models need more time. Avoid over-curing — too much UV exposure can make the part brittle and cause the material to yellow. Can I wash and cure in the same machine? Yes. The Wash & Cure 3 Max handles both functions: first wash using WASH or AUTO mode, then cure using the UV platform. AUTO mode chains both processes together so all you need to do is swap the basket for the curing platform. How do I protect my printer during post-processing? Post-processing won't damage your printer, but it's worth keeping the LCD screen in good condition with a screen protector and replacing the FEP/nFEP film when it wears out, ensuring clean prints that are ready to wash and cure. Can I cure resin in sunlight instead of using a machine? Sunlight can cure resin, but the process is slow, uneven, and hard to control — leading to under-cured areas and warping. A dedicated UV curing station like the Wash & Cure 3 Max delivers the optimal wavelength (405 nm) and 360° rotation for consistent, repeatable results.