APlusLift 14,000LB 2-Post Overhead Symmetrical and Truly Asymmetrical Single Release Car Lift with 3 Year Warranty - HW-14ASY

All 2-Post Car Lifts Industry leading 3 YEAR WARRANTY (a $499 value!) Single Point Safety Lock Release System Supports Symmetrical Installation with Columns Facing Each Other or Asymmetrical Installation with Columns Rotated 30 Degrees! 119" Drive Through Width with Symmetrical Installation and 109" Drive Through Width with Asymmetrical Installation Front and Rear 3-Stage Arm Assemblys CE Certified Lift Structure and Hydraulic System - Tested for 115% Dynamic Load Capacity and 150% Static Load Capacity One Set of 3" Tall Truck Adapters Included; 6'8" Lift Height Maximum with Truck Adapters All Robot Welded Structure with Durable Powder Coated Finish APlusLift HW-14ASY car lift (auto hoist) is one of the most heavy duty overhead symmetrical and asymmetrical car lifts built with quality materials and good workmanship. It is a commercial grade lift with an addition of single point lock release and an option to install the columns in a true asymmetrical way. That is, the columns can be installed facing each other (symmetrical installation) or with a 30-degree rotation to maximize door opening and vehicle access (asymmetrical installation). We are proud to offer an industry leading 3 year warranty for all parts (a $499 value)! We have all replacement and optional parts available for our lifts. We welcome suggestions to improve our products and service! Free shipping to lower 48 states with forklift (or similar) on-site, or free pickup at nearby terminal. Car lifts require on-site forklift (no liftgate). We strongly recommend against renting a forklift; expense not reimbursed. See shipping policy below for limited access/remote/high-cost areas. Warehouse Pickup Locations (Contact Us for $200 Discount): Charlotte (NC), Chicago (IL), Dallas (TX), Jacksonville (FL), Kansas City (MO), Mobile (AL), Portland (OR), Tacoma (WA), and Watsontown (PA). Frequently Asked Product, Order, and Shipping Questions and Technical Questions Specifications Model HW-14ASY (This Model) AP-12SR (for Comparison) Manual HW-14ASY Manual AP-12SR Manual Style Overhead Overhead Column Installation Symmetric or Asymmetric Symmetric Arm Arrangement Both Front and Rear 3-Stage Assemblys Symmetric Lock Release Single Point Release Single Point Release Warranty 3 Years (36 months) 3 Years (36 months) Lifting Capacity 14,000 LB 12,000 LB Overall Height 165 3/4" or 153 15/16" 165" Overall Width 160" (standard) 161" (Column rotated) 149" Maximum Lift height with Truck Adapters 80" 79" Maximum Lift height without Truck Adapters 74" 70" Maximum lift height from bottom of the arm to the ground 70" 71" Minimum Height of Adjustable Pads from Ground 4.5" 4" Drive Through Width (Carriage to Carriage) 119" (symmetric) 109" (asymmetric) 109" Column Inside to Inside 130" (symmetric) 120" (asymmetric) 123" Column Outside to Outside 127" (symmetric) 138" Column Cross Section 13 1/8"L x 8 3/4"W 14 3/8"L x 7 13/16"W Driving Mode Dual hydraulic cylinders, direct drive Dual hydraulic cylinders, direct drive Motor 220V Single Phase 4HP 13.6A (recommend a 20A breaker) 220V Single Phase 3HP 10A (recommend a 20A breaker) Hydraulic Oil 3-5 gallons AW32/AW46 (not included) 3-5 gallons AW32/AW46 (not included) Time to full rise 50 seconds 75 seconds Shipping Weight 2650 LB 2500 LB Shipping package size 115"L x 50"W x 24"H 117"L x 22"W x 50" H Concrete Requirement 6" thick at 3500 psi reinforced with fiberglass or steel Parts Included 4 pieces of adjustable screw pads 4 pieces of 3" tall truck adapters (height extensions) 12 anchor bolts 12 shims 4 pieces of adjustable screw pads 10 anchor bolts 10 shims Optional Parts 2 3/4" and 6" Tall Truck Adapters Arm Assembly 3-Stage Arm Assembly Symmetrical Arm Assembly Front Arms Straight Front 3 Stage reach from 29 1/2" to 55 1/8" Straight Front 3 Stage reach from 37 1/2" to 72 3/16" Back Arms Straight Rear 2 Stage reach from 37 3/8" to 70 7/8" Straight Rear 3 Stage reach from 37 1/2" to 72 3/16" Column Steel Thickness 1/4" 1/4" Carriage Steel Thickness 5/16" 1/4" Carriage Yoke Thickness 13/16" 3/4" Arm Steel Thickness 3/8" 5/16" Base Plate Steel Thickness 13/16" 13/16" Model HW-14ASY (This Model) AP-12SR (for Comparison) Features CE-certified lift structure and hydraulic system Third-party tested with a dynamic load capacity of 115% Third-party tested with a static load capacity of 150% Durable hydraulic system Easy to operate and maintain Single-point safety lock release Double seal rings protecting PU material Lifting operation by pressing the "UP" button on the motor Manual lowering operation by pressing the lever Relief valve built-in power pump to prevent overloading Automatic arm lock restraints Relief valve built-in power pump to prevent overloading Door guard protection rubber Up-limit switch to protect cylinders working stroke used in safe length scope Heavy duty 3/8" diameter cable and 4.5" pulley that reduce high stress on synchronization process and increase cable life Ultra-high molecular self-lubricating nylon slider that ensures carriage smooth moving up and down All 2-Post Car Lifts