Festool PLANEX EASY LHS-E 225 EQ Drywall Sander + CT 36 AutoClean Dust Extractor Starter Set
Key Features Complete Drywall System The Festool PLANEX EASY LHS-E 225 EQ-CB Drywall Sander Starter Set bundles the long-reach sander, a HEPA dust extractor, a pre-loaded abrasive Systainer, and a hand sanding block for detail work — so you go from bare drywall to finish-ready walls and corners with one purchase. Reach Ceilings Without a Ladder Shuffle At 62.99 in. (1.6m) overall length — even longer reach than Festool's PLANEX 2 — the LHS-E 225 EQ-CB reaches ceilings and upper wall sections from the floor, cutting down on the ladder climbing and repositioning that slows down drywall finishing. Suction That Doesn't Fade The included CT 36 EI AC extractor uses automatic filter cleaning to maintain consistent suction through heavy sanding sessions, instead of losing pull as the filter loads up with drywall dust. Overview The Festool PLANEX EASY LHS-E 225 EQ-CB Drywall Sander Starter Set (578408-577874-578960-578281) is a complete long-reach drywall sanding system built for drywall finishers, painters, and remodeling crews who need to sand walls and ceilings smooth — and clean up corners and edges by hand — without wrestling separate tools and dust collection into a working setup. This is a drywall sander combo kit designed for wall, ceiling, and detail sanding, pairing the PLANEX EASY LHS-E 225 EQ-CB long-reach sander with the CT 36 EI AC HEPA dust extractor, a pre-loaded abrasive Systainer, and an HSK-A hand sanding block — a Tool Nut bundle built around Festool's drywall sanding lineup. The LHS-E 225 EQ-CB itself runs an 8-1/2 in. (215mm) StickFix sanding pad under an 8-7/8 in. (225mm) abrasive disc, driven by a direct-drive EC-TEC brushless motor with a variable speed range of 400 to 920 RPM. Because the motor sits directly over the pad instead of driving it through a flexible cable, there's no drive-cable drag and no carbon brushes to wear out and replace — less downtime, less weight at the head, and a flexible head joint that adds freedom of movement a rigid long-reach sander doesn't have. At 62.99 in. (1.6m) long, it reaches ceiling seams and high wall sections from standing height, which is the main reason a long-reach sander earns its price over a standard random orbital — less ladder time, less strain from working overhead. Dust handling is where this bundle earns the "system" label rather than just being a sander with a vacuum attached. The included CT 36 EI AC extractor carries HEPA-rated filtration and Festool's AutoClean function, which automatically clears the filter during operation instead of relying on you to stop and manually knock dust loose. On a job that's producing a steady stream of fine drywall dust for hours, that automatic cleaning is what keeps suction from tapering off halfway through the session — weaker suction means more airborne dust and a dirtier job site, so the AutoClean function isn't a minor convenience, it's the thing that keeps the whole system working as advertised. The pre-loaded abrasive Systainer (D225 GR NET HSK-A) keeps a range of Granat net abrasive discs organized and ready to grab by grit, so you're not digging through loose sandpaper mid-job when you move from a coarse pass to a finishing grit. The sander itself keeps things simple out of the box — StickFix backing pad and plug-it cable ready to go — with the abrasive variety and dust extraction handled by the Systainer and CT 36 included in this set. System compatibility runs through Festool's abrasive ecosystem rather than a separate interface pad — the 215mm StickFix backing pad on the LHS-E 225 EQ-CB accepts the included 225mm Granat net abrasive discs directly. The 27/36mm dust port on the sander matches standard Festool CT-series extractor hoses, including the kink-resistant D36x3.5 hose sold separately for extended reach, and the included HSK-A hand sanding block runs its own 80x133mm Granat, Rubin, or Granat Net abrasives while connecting to that same CT 36 extractor through its own integrated hose adapter — one extractor covers both machine sanding and hand detail work. Buy this set if you're doing regular drywall finishing work — new construction, remodels, patch repair — and want the sander, extraction, abrasives, and hand-detail sanding sorted out in one purchase instead of assembling a system piece by piece. It's built for drywall finishers, painters prepping walls for finish, and general contractors who take on their own drywall work, including the corners and edges the long-reach sander can't get into. If your sanding needs are occasional and small-scale, a standard random orbital sander will cover it for less; this bundle is for crews who are sanding walls, ceilings, and detail areas often enough that reach, dust control, and abrasive organization actually matter to the bottom line. What's in the Box PLANEX EASY LHS-E 225 EQ-CB Long-Reach Drywall Sander (578408) — includes 8-1/2 in. (215mm) StickFix backing pad, 4m (13 ft) plug-it power cable, and a soft transport bag CT 36 EI AC HEPA Dust Extractor (577874) Abrasives Systainer³ D225 GR NET HSK-A (578281) HSK-A Hand Sanding Block, 80x130mm (578960) — includes bypass adapter, Festool hose adapter, 80x133mm protection pad, and Granat Net abrasive in 80, 120, and 180 grit (2 sheets each) This bundle pairs Festool's PLANEX EASY long-reach sander with hand-detail sanding and shared dust extraction — components are also sold individually elsewhere in our Festool catalog. Key Specifications Motor Speed (variable) 400 – 920 RPM Power Consumption (sander) 400 W (120 VAC) Sanding Pad Diameter 8-1/2-in (215 mm), StickFix Abrasive Disc Diameter 8-7/8-in (225 mm) Motor Type Direct-Drive EC-TEC Brushless (no carbon brushes) Overall Length 62.99-in (1.6 m) Dust Port Diameter 1-1/16-in / 1-7/16-in (27/36 mm) Weight (sander only) 8.82 lbs (4.00 kg) Compatibility Abrasive System Uses Festool Granat 8-7/8 in. (225mm) net and sheet abrasives across multiple grits, organized in the included abrasive Systainer. Sanding Pad 215mm StickFix backing pad accepts Festool StickFix and Granat Net abrasive discs directly — no separate interface pad required. Dust Extraction 1-1/16 in. / 1-7/16 in. (27/36mm) dust port pairs with the included CT 36 EI AC HEPA extractor and standard Festool CT-series extraction hoses. Hand Sanding The included HSK-A 80x130 hand sanding block runs Festool Granat, Rubin, or Granat Net abrasives cut to 80x133mm, and connects to the same CT 36 extractor through its own integrated hose adapter. Built For DrywallRemodelingNew ConstructionPainting PrepGeneral Contracting Pro Tip Let the CT 36's AutoClean filter cleaning do its job instead of stopping to manually tap dust off the filter — the automatic cycle keeps suction consistent longer during a heavy sanding session and helps the filter last longer overall. Tool Nut's Take Tool Nut's Take Sand the Whole Room — Then the Corners — Without Stopping to Reset The Festool PLANEX EASY LHS-E 225 EQ-CB Drywall Sander Starter Set hands you the sander, the extraction, the abrasives, and a hand sanding block for the spots the machine can't reach — all matched to work together. Who it's for: Drywall finishers and remodeling crews who sand enough walls and ceilings that reach, dust control, and abrasive organization actually save time on the job. Why it stands out: The direct-drive brushless motor skips the carbon brushes and drive cable of older long-reach sanders, the CT 36's AutoClean filtration keeps suction from fading over a long session, and the included HSK-A hand sanding block covers the corners and edges the long-reach sander can't get into. Worth knowing: The HSK-A hand sanding block uses its own 80x133mm abrasive format, separate from the 225mm discs the machine sander runs — both draw from the same CT 36 extractor. Common Questions Does this kit include sanding discs? Yes — the abrasive Systainer ships loaded with Granat net abrasive grits for the machine sander, and the HSK-A hand sanding block ships with its own 80x133mm Granat Net sheets in 80, 120, and 180 grit. Is the dust extractor included, or do I need to buy one separately? The CT 36 EI AC HEPA dust extractor is included in this set. How far can the sander reach? The LHS-E 225 EQ-CB measures 62.99 in. (1.6m) overall, letting it reach ceilings and high wall sections from the floor. Can I use the hand sanding block with a non-Festool vacuum? The included hose adapter is built for Festool CT-series extractors; it's not designed for non-Festool vacuums. What's the hand sanding block for? It's for corners, edges, and detail areas the long-reach machine sander can't get into — it connects to the same CT 36 extractor for dust-free hand sanding.