Cooper&Hunter 4 Ton Air Handler Unit – 48,000 BTU Ductless Mini Split AC & Heat Pump, R410A, 26.4 SEER, Inverter, 115V, Wi-Fi Enabled – Compatible ONLY with CH-N48LCU-230VO and CH-NHPR48LCU-230VO (Single-Zone)

Cooper&Hunter 48,000 BTU Multi-Position Air Handler Indoor Unit – CH-48AHU A 48,000 BTU multi-position air handler indoor unit for ducted single-zone applications. It uses R-410A, supports vertical or horizontal installation, and is compatible with the CH-N48LCU-230VO or CH-NHPR48LCU-230VO outdoor condenser. Indoor Unit Only48,000 BTU208-230VR-410ASingle Zone 1:1Multi-Position0-0.8 in ESP24V Thermostat Included Why customers choose this indoor unit True multi-position design: Supports horizontal or vertical upward/downward installation for flexible ducted layouts. Adjustable static pressure: Provides an external static pressure range of 0 to 0.8 in. w.g. Intelligent airflow: Multiple fan speeds allow static pressure to be adjusted automatically or manually. Anti-cold-air function: Delays fan operation during heating startup until the coil is warm. Fast cooling and heating: Runs at high output when room temperature is substantially different from the setpoint. At a glance Rated capacity 48,000 BTU Unit type Ducted air handler Power 208-230V, 1Ph Installation Vertical / horizontal / downflow What’s included (1) Cooper&Hunter indoor unit: CH-48AHU Manufacturer documentation and available product resources Indoor component only: The compatible outdoor condenser, refrigerant line set, electrical wiring, drain materials, mounting hardware, and installation accessories are sold separately unless a corresponding product variant specifically includes them. Control options 24V wall thermostat: Listed as included Remote control: Listed as included Internet Port Kit: Optional and not included Mobile app: Downloadable C&H Remote app requires compatible optional hardware Compatibility – Single-Zone R-410A Systems Important: This listing is for the CH-48AHU indoor component only. It is not a complete heating and cooling system and cannot operate without an approved outdoor condenser. Compatible outdoor condensers CH-N48LCU-230VO or CH-NHPR48LCU-230VO Correct configuration: One CH-48AHU indoor unit plus one compatible outdoor condenser listed above creates the equipment match. Required piping, electrical, drainage, controls, and installation materials must also be provided. Key features True multi-position design: Supports horizontal or vertical upward/downward installation for flexible ducted layouts. Adjustable static pressure: Provides an external static pressure range of 0 to 0.8 in. w.g. Intelligent airflow: Multiple fan speeds allow static pressure to be adjusted automatically or manually. Anti-cold-air function: Delays fan operation during heating startup until the coil is warm. Fast cooling and heating: Runs at high output when room temperature is substantially different from the setpoint. Protection and convenience: Includes auto restart, refrigerant-leak detection, Sleep, Turbo, quiet operation, and GoldFin coating. Aluminum coil: Designed with fewer corrosion points than a conventional copper-coil configuration. Optional auxiliary heat: Compatible backup heater kits are described in 5, 10, 15, and 20 kW sizes and are sold separately. Technical specifications – CH-48AHU Model CH-48AHU Component type Ducted air handler indoor unit only System configuration Single-zone 1:1 match Compatible outdoor units CH-N48LCU-230VO; CH-NHPR48LCU-230VO Refrigerant R-410A Rated capacity 48,000 BTU Power source 208-230V, 1Ph, 60Hz Voltage range 187-253V Controller RG10D remote; 120X or 120N wired controller Matched-system SEER2 16.2 Matched-system EER2 8.6 Dehumidification 10.82 pints per day Filter size 19.40 x 20.35 in Liquid / gas pipe size 3/8 in / 5/8 in Indoor airflow 1,470.59 / 1,282.35 / 1,094.12 / 905.88 CFM Indoor noise level, H/M/L 53.5 / 47 / 43.5 dB(A) External static pressure range 0-0.8 in. w.g. Indoor operating range, heating 32°F to 86°F Indoor operating range, cooling 60°F to 90°F Minimum circuit ampacity 7.5A Maximum fuse / breaker 15A Drain connection 1 in Unit dimensions 21.02 x 21.02 x 49.02 in Packing dimensions 26.57 x 24.41 x 52.56 in Net / gross weight 132.50 / 155.87 lbs Performance-rating note: SEER, SEER2, EER, EER2, HSPF, COP, cooling-capacity, and heating-capacity values shown in manufacturer submittals are ratings for a specific approved indoor-and-outdoor equipment match. They are not standalone efficiency ratings for this indoor component. The supplied technical data lists 208-230V power for this indoor unit. Confirm the product title, electrical data, and selected condenser before import or installation. Product resources Submittal – CH-N48LCU-230VO + CH-48AHUSubmittal – CH-NHPR48LCU-230VO + CH-48AHU120N Wired Controller Owner’s ManualAir Handler Remote ManualUser Manual – 36K to 60K Air HandlersAir Handler Leaflet Confirm the selected outdoor model, approved match, and installation requirements before purchasing or installing. Frequently asked questions Is this a complete ducted heat-pump system? No. This listing is for the CH-48AHU indoor air handler only. Which outdoor condensers are compatible? The listed compatible single-zone condensers are CH-N48LCU-230VO and CH-NHPR48LCU-230VO. Is a 24V thermostat included? The supplied control-options list states that a 24V wall thermostat is included. Is the auxiliary heater included? No. Auxiliary heat kits are optional, sold separately, and listed in 5, 10, 15, and 20 kW sizes. Can it be installed horizontally? Yes. The supplied product information describes horizontal and vertical upward/downward installation positions. Product specifications, approved combinations, documentation, and warranty terms may be revised by the manufacturer. Verify compatibility and current technical requirements before installation.