Radium Engineering Fuel Hanger EVO X Fits Deatschwerks DW400 - 20-1644

COMPATIBILITY 08-15 Mitsubishi Lancer Evolution X COMPATIBLE PUMPS There will be enough components included with this option to use 1 or 2 fuel pumps. Depending on the setup, some parts will simply not be used. This system is compatible with the following fuel pumps: Deatschwerks DW400 OVERVIEW The new Radium Engineering fuel pump hanger for the Mitsubishi EVO X has been redesigned for improved fuel collection and easier installation. It completely replaces the factory in-tank fuel pump module and allows 1 or 2 aftermarket fuel pumps to be used. The OEM level sender, fuel temperature, and fuel tank pressure sensor are retained in order to maintain factory functionality. Please note that product may differ slightly from what is shown in photos and videos. For a complete and comprehensive fuel delivery system for the EVO X, CLICK HERE. PLUMBING For direct connection to the OEM fuel lines, adapter fittings are included with all configurations. The fuel hanger can also be used with the included 8AN and 6AN adapter fittings for installing aftermarket AN style hoses. FUEL STARVATION The kit includes a 1-piece anodized aluminum collector box that makes installation a breeze and keeps fuel trapped around the pump inlet(s). As shown below, there is a 355 LPH 1-way fill valve incorporated in the bottom of the collector that allows fuel in, but not out. The collector box is constantly replenished with fuel returning from the pressure regulator. VENTURI JET PUMP The OEM venturi jet pump in the return line creates a restriction with the stock EVO X fuel pump module. Radium Engineering has redesigned the siphon system to eliminate this restriction but still effectively scavenges fuel. This means higher flowing pumps can safely be used without fuel pressure issues. Depending on fuel pressure, the venturi jet pump will consume 15-45 LPH. Take this fuel loss into consideration when sizing the fuel pumps. If it is important for fuel pressure to hold steady after the engine is shut down, install a check valve somewhere in the fuel system. SPECS & FEATURES 8AN ORB Female Pump-Out Port 6AN ORB Female Return Port Collector Box with 1-Way Fill Valve Venturi Jet Pump Siphon Single Merged Fuel Pump Outlet High Current Electrical Connections Black Anodized Adapter Fittings Fuel Level and Temp Sensor Mount Twin Fuel Pump Compatibility Stainless Hardware and Clamps Anti-Rotation Stainless Terminals Alternative Fuel Compatibility INSTALLATION NOTES Radium Engineering recommends upgrading the feed and return lines when using multiple pumps. There is an OEM pressure sensor (Mitsubishi 8651A025) found on the top hat to meet North American emission standards. For international vehicles that did not come with this standard, 20-0421 EVO X FUEL TANK PRESSURE PLUG is required. Single fuel pump installations can re-use the OEM fuel pump controller wiring. Radium recommends upgrading the wiring to ensure the pumps are operating at their full potential. This kit eliminates the OEM "post" fuel pump filter. A low-micron aftermarket fuel filter should be installed downstream to protect the injectors from debris. INCLUDED 20-1644 These fuel pump hangers come partially assembled and include all necessary components to install 1 or 2 compatible fuel pumps. They also include an electrical parts bag to assist with external wiring atop the hanger. Fuel pumps are sold separately. Looking for more Radium? Check out the complete range HERE. Looking for Radium Instructions? Find the complete list of instructions HERE.