Ubiquiti UBB UniFi Building Bridge — 60 GHz Gigabit Point-to-Point Link

Gigabit Connectivity Between Two Buildings — No Trenching, No Fiber The Ubiquiti UniFi Building Bridge (UBB) links two networks over a clear line-of-sight path at distances up to 500 meters (1,640 ft). Instead of pulling conduit across a parking lot or paying for a leased circuit, you mount a radio on each roofline, aim them at each other, and adopt them in UniFi Network. The 60 GHz link carries up to 1.7 Gbps bi-directional throughput — enough to extend a full gigabit LAN across a campus, warehouse yard, or apartment complex. 60 GHz Primary, 5 GHz Backup The 60 GHz band is nearly free of interference in most environments, which is what makes the throughput possible. It's also more sensitive to heavy rain than lower bands, so each UBB carries an independent 5 GHz 802.11ac radio that takes over automatically if the primary link degrades. Your uplink stays alive through the weather instead of dropping until the storm passes. Aim It Without a Spectrum Analyzer An onboard LED signal indicator shows link quality as you adjust the ball-joint mount, so a single installer can align the dish by eye. Most links are up and passing traffic within minutes of mounting. The 2-pack kit arrives already paired from the factory. Managed Inside UniFi The UBB adopts into your existing UniFi Network setup alongside your switches and access points — same dashboard, same topology map, same firmware workflow. Manage it from a UniFi Console, Official UniFi Hosting, or a self-hosted UniFi Network Server. Link security is WPA2-AES, always on. Built for the Roof IPX6 weatherproof housing, an operating range of -40 to 60 °C, and wall or pole mounting hardware in the box. Powered over Ethernet from the included 48V Gigabit PoE adapter, so the only cable running up to the radio is a single Cat5e/Cat6 line. Common Applications Connecting a warehouse, shop, or outbuilding to the main office network School campus building-to-building links Extending a network across a road or parking lot where trenching isn't practical Temporary or leased sites where permanent fiber can't be justified Backhaul for rooftop cameras or outdoor AP clusters Technical Specifications Model UBB Main Radio 60 GHz (57–66 GHz), 802.11ad Backup Radio 5 GHz, 802.11ac (WiFi 5), 2x2 MIMO Max Data Rate 60 GHz: 1.7 Gbps | 5 GHz: 866.6 Mbps (BW80) Maximum Range 500 m (1,640 ft), clear line of sight Antenna Gain 60 GHz: 17.2 dBi | 5 GHz: 10 dBi | 2.4 GHz: 2 dBi (BLE) Max TX Power 60 GHz: 19 dBm | 5 GHz: 25 dBm Operating Mode Point-to-Point (PtP) Wireless Security WPA2-AES (always on) Power Method PoE — 48V Gigabit PoE adapter included Weatherproofing IPX6 Operating Temperature -40 to 60 °C (-40 to 140 °F) Dimensions ⌀140 x 90 mm (⌀5.5 x 3.5 in) Mounting Wall or pole Management UniFi Network (Console, Official Hosting, or self-hosted) What's in the Box 2-Pack Kit: (2) UniFi Building Bridge radios, (2) ball joint mounts, (2) lock rings, (2) metal straps, (2) Gigabit PoE adapters (48V, 0.32A) with mounting brackets, (2) power cords.