Haotian 200W JPT MOPA Fiber Laser Engraver
Full Industrial Production Capacity. The 200W MOPA Fiber Laser for Shops Where Throughput Is the Business. The 200W JPT MOPA fiber laser is built for production environments where the machine runs daily, deep engraving throughput directly affects revenue, and downtime is not acceptable. At 200W average power, it handles the full MOPA application set — color marking, deep engraving, traceability, thin metal cutting — at the highest throughput in the Haotian fiber laser lineup. Two source options: JPT M7 for metal production, JPT M8 when glass drilling or 2.5D mold cavity work is a current requirement. Compatible Materials: Metal Plastics Stone Leather Rubber What 200W Means for a Production Shop 200 watts of average MOPA power is the point where the fiber laser stops being a constraint on what your shop can take on. Deep mold texturing, large-format 3D relief carving, production traceability at industrial line speeds, deep serial number engraving on hard tool steel, thin metal cutting at meaningful speeds — the 200W handles all of it without the machine becoming the bottleneck. The 200W also ships with upgraded galvo hardware. The M7 variant uses the Sino-Galvo SG2206 scanning head — a larger aperture, higher-throughput head better suited to sustained high-power operation than the SG7110 used at 100W and 120W. The M8 variant uses the G3 PRO 2.5D galvo with integrated EZCad3 for glass and 2.5D mold work. Both include the full motorized 500mm Z-axis tower, industrial water chiller, and quartz F-theta lenses. What 200W doesn't do: Powder-coated tumblers (CO2 galvo), wood/leather/acrylic (CO2 laser). Glass drilling is available only on the M8 variant with the G3 PRO galvo. The Two 200W Sources — M7 vs. M8 JPT MOPA M7 (M-version) JPT MOPA M8 (M-version) Source generation M7 — proven, field-tested at industrial scale M8 — latest generation, optimized peak power Beam quality (M²) Below 1.6 Below 1.5 Color marking on stainless/titanium Yes — full spectrum Yes — full spectrum Deep engraving on metals Excellent — industrial throughput Excellent — industrial throughput Thin metal cutting Up to ~2mm Up to ~2mm Glass drilling No Yes — G3 PRO 2.5D + EZCad3 required 2.5D mold cavity work Limited Full layer-by-layer Z control Galvo head SG2206 dual red-dot G3 PRO 2.5D with integrated EZCad3 Software EZCad 2 original / LightBurn EZCad3 + LightBurn (2D work) Cooling Water cooled (industrial chiller included) Water cooled (industrial chiller included) Audited color consistency at volume Good Better — tighter M² for large-batch color work Best for Metal-only production at 200W power Production that includes glass or 2.5D mold work Price Lower Premium ($12,500) for glass and M8 architecture The honest call: The 200W M7 is the right machine for the majority of production shops because the majority of fiber laser production work is on metals. Color marking, deep engraving, traceability, thin cutting — all of it is available at full industrial throughput. Pay the M8 premium only when glass, crystal, or 2.5D mold cavity work is a genuine and current business requirement. If glass is on a "maybe someday" list rather than a live contract list, the M7 is the correct choice. What's Included — Complete Working System Every 200W configuration ships complete: JPT MOPA source at your selected variant (M7 M-version or M8 M-version) Sino-Galvo SG2206 with dual red-dot positioning (M7) or G3 PRO 2.5D with integrated EZCad3 (M8) Two quartz F-theta lenses of your choice — 70×70, 110×110, 150×150, 175×175, 210×210, or 300×300 mm Rotary attachment — D60, D80, or D100 Motorized 500mm Z-axis tower Foot pedal for hands-free triggering OD5+ laser safety glasses EZCad 2 original software (M7) or EZCad3 (M8) Industrial water chiller (included) Fixed aluminum worktable Free DDP shipping to the US, Canada, and EU. Approximately 30 days delivery. 3-Year Warranty — And Why That Number Actually Matters At $9,500–$12,500, the machine you're buying needs to be a long-term production asset, not a liability. Both 200W variants carry 3 years of full coverage on the JPT source and the complete machine — chiller, galvo head, motorized Z-axis, controller, and all electronics. Component failures within the warranty window: replacement ships to you at no cost, broken part stays with you, no return shipping. Source and galvo defects: handled through manufacturer warranty with all freight covered by Haotian. Lifetime email support continues after the 3-year period. Competing brands at this power level commonly offer 1 year on machine and 1–2 years on source. In a production environment running the machine multiple shifts, the difference between 1-year and 3-year coverage is the difference between an anticipated cost and a surprise repair bill. The Maker's Chest Difference USA-based technical support by phone and email — Chiller commissioning, EZCad 2/3 and LightBurn configuration, deep engraving parameter migration from smaller machines, production troubleshooting. We can help get you to full production faster. Pre-sale guidance — Deciding between 200W M7 and M8, or between 120W and 200W? We'll ask about your actual production volume, material list, and run schedule and give you a direct answer. Frequently Asked Questions Q: How much faster is the 200W than the 100W on real deep engraving jobs? Approximately 50% faster, which means a job that takes 10 hours at 100W takes roughly 5 hours at 200W. Across a full week of production, that's roughly 2 additional full days of deep engraving capacity without adding labor. The math is more dramatic at higher pass-count jobs — deep mold work or large-area 3D relief carving where the 100W was running for 20+ hours per piece can be compressed significantly. Q: What makes the M8's audited color consistency better than the M7's at volume? The M8's M² below 1.5 (vs. below 1.6 for the M7) produces tighter pulse-to-pulse beam consistency. For large-batch color marking where piece 1 and piece 500 need to match within a contractually specified tolerance, the M8's tighter beam delivers less color drift across the run. For most production shops doing color marking on custom items and small batches, the M7's color consistency is excellent and the difference from the M8 is not visible in the finished product. Q: What is the SG2206 galvo, and how is it different from the SG7110 in the 100W/120W? The SG2206 is a larger-aperture, higher-duty-cycle scanning head designed for sustained high-power operation. It handles the thermal and mechanical demands of 200W continuous production better than the SG7110, which is why the 200W M7 ships with it while the 100W and 120W use the SG7110. The SG2206 delivers 99.9% linearity, 6,000 mm/s marking speed, and step response under 288 microseconds. Q: Does the 200W M8 drill glass faster than the 120W M8? Yes — approximately 40–60% faster, because more average power removes more material per layer per unit time. Both use the same G3 PRO 2.5D galvo and EZCad3 process; the 200W simply progresses through layers more quickly. For shops where glass drilling is high-volume daily production rather than occasional work, the 200W M8 is the better long-term investment. Q: What does the workshop need to accommodate the chiller? The industrial water chiller is a separate cabinet that sits adjacent to the machine and connects with two coolant hoses and one power cable. Plan for chiller footprint (typically 400–600mm wide, 600–900mm tall) in your workspace. The chiller runs on standard single-phase power and adds moderate background noise — comparable to an air compressor on light duty. Coolant is distilled water; maintain level and change annually. Q: Can I run the 200W from standard electrical service? Yes. The complete system — machine and chiller — runs on standard single-phase 110V–240V, 50–60 Hz. No three-phase electrical service required. Total draw including the chiller is within standard commercial circuit ratings. An electrician consultation is worthwhile for dedicated circuit planning if you're running multiple shifts. Q: Is color marking parameter knowledge from my 60W or 100W machine transferable? Yes. The MOPA pulse width and frequency relationships to stainless oxide layer formation are consistent across the M7 family. Your existing color marking parameters are a valid starting point on the 200W — you may tune speed up because more power delivers the same result faster. The M7's 2–500 ns pulse width range is identical to the 60W and 100W M7. Q: Does Haotian offer returns? Haotian is an exception to our standard Return Policy — we're unable to accept returns on Haotian products. This is for two reasons, the first one being that each order is built to spec once placed. Combined with the high cost of return shipping to China, along with duties and other fees make returns impractical for both us and our customers. Because of this, our team is happy to answer any questions before you purchase — we want to make sure what you're ordering fully meets your needs before you commit. We are also available post purchase to answer any unknowns that might come up, and resolve those to your satisfaction. Specifications Haotian 200W JPT MOPA Fiber Laser Engraver Specifications: Laser Source JPT M7 MOPA M-version (YDFLP-200-M7-M-R) Average Output Power 200W Wavelength 1064 nm Pulse Width Range 2 to 500 ns (independently adjustable, full MOPA) Pulse Frequency Range 1 to 4,000 kHz (independently adjustable) Internal Component Grade Imported seed and pump diodes (Canada/France) Galvo Scanning Head Sino-Galvo SG2206 with dual red dot alignment Galvo Aperture 10 mm Maximum Marking Speed 6,000 mm/s Maximum Positioning Speed 11,000 mm/s Writing Speed 516 cps Step Response Time (1% full stroke) 288 microseconds Step Response Time (10% full stroke) 895 microseconds Tracking Error Less than 164 microseconds Linearity 99.9% Repeatability Less than 8 microradians Gain Error Less than 5 milliradians Zero Offset (Batch Origin) Less than 5 milliradians Long-Term Drift (8 hour run) Less than 0.5 milliradians Proportional Drift Less than 40 PPM per degree C Zero Drift Less than 15 microradians per degree C Lens Damage Threshold (K9) 9.1 J/cm squared Lens Damage Threshold (Si) 10 J/cm squared Galvo Mechanical Scan Angle Plus or minus 11 degrees Galvo Input Voltage Plus or minus 15 VDC Galvo Rated Current 2 A Interface Protocol XY2-100 Galvo Operating Temperature 0 to 45 degrees C Galvo Storage Temperature Minus 10 to 60 degrees C Galvo Dimensions 118.5 x 96.5 x 93.6 mm Mirror Weight Approximately 1.65 kg Standard Working Area 110 x 110 mm Optional Working Areas Up to 300 x 300 mm Lens Type Quartz F-theta (required at this power level) Z-Axis Type Motorized 500mm tower Controller EZCAD Original (not Lite) Software Compatibility EZCAD Original, LightBurn (Windows, macOS, Linux) Cooling System Water cooled (industrial chiller included) Focus Positioning Dual red dot alignment system Foot Pedal Hands-free production switch (included) Source Lifespan Over 100,000 hours rated operation Body Material 100% aluminum (custom colors available) Color Marking Full spectrum on stainless steel and titanium Deep Engraving Multi-millimeter depth on metals (material dependent) Thin Metal Cutting Up to 2 mm depending on material Warranty 3 years on laser source and complete machine Shipping Free DDP worldwide (US, Canada, EU in approximately 30 days) Warranty & Manuals Haotian 200W JPT MOPA Split Fiber Laser Engraver Warranty Details: Haotian JPT MOPA Fiber Laser comes with a 3-year warranty on the laser engraving machine (excluding consumables / shipping). Dedicated, local US-based support for quick answers to questions. Haotian 200W JPT MOPA Split Fiber Laser Product Manuals: Click the links below to download product manuals for the Haotian JPT MOPA Fiber Laser Engraver. Haotian 200W JPT MOPA Split Fiber Product Manual Downloads: Haotian 200W JPT MOPA Split Fiber Product Manual Download