TOWILD BL1500 Bike Light

TOWILD BL1500 is a compact 1500-lumen front bike light built for riders who want a cleaner cockpit, purposeful beam control and dependable visibility from daytime roads to night rides. One light, two beam patterns The BL1500 combines a focused beam for forward reach with a wide flood beam for broader road awareness. Its flood optic uses an anti-glare cut-off line to help direct light onto the road when correctly aimed, while the head pivots downward by up to 32° to fine-tune the beam for your riding position. Verified output and runtime Mode Output Approx. runtime* Focus beam - High 1500 lumens 2 hours Focus beam - Low 800 lumens 3 hours 30 minutes Flood beam - High 800 lumens 3 hours Flood beam - Low 400 lumens 6 hours Daytime warning 200 lumens 50 hours Nighttime warning flash 200 lumens 18 hours *Approximate TOWILD laboratory values using the built-in 3700mAh rechargeable lithium-ion battery. Actual runtime varies with battery condition, temperature and riding use. Made for a streamlined setup At 102 × 53 × 26mm and 150g including the battery, BL1500 fits naturally into a modern road-bike cockpit. It supports computer extension-bracket setups and under-handlebar mounting, helping keep a bike computer, light and compatible action camera arranged in one tidy system. Control that stays within reach Press and hold the main button for 0.5 seconds to turn the light on or off. In flood mode, one press cycles through nighttime warning, daytime warning, low and high output. Double-press to enter focus mode, then single-press to switch between focus low and high. The included wireless remote lets you adjust brightness and beam mode from the handlebar. Hold Turbo for up to 1500 lumens; release it to return to the previous mode. Intelligent mode for everyday riding With the light off, hold the power button for 3 seconds to switch between Manual and Intelligent modes. The indicator displays green in Manual mode and blue in Intelligent mode. In Intelligent mode, the light can turn off after 120 seconds without movement and reactivate when vibration is detected. The remote remains available for up to one hour after standby begins. USB-C charging and emergency power The integrated 3700mAh battery charges by USB-C with up to 2.4A input; full charging is approximately 3 hours. BL1500 can also supply USB-C power to a connected device through the included discharge adapter, with up to 2A output. Focus High and Flood High are unavailable while discharging. Ready for changing conditions BL1500 is rated IPX6 for water resistance and specified for 1.2m impact resistance, with a maximum stated beam distance of 200m. Intelligent temperature control reduces output if the lamp head reaches 65°C. Before wet-weather rides, ensure the USB-C port cover is fully closed. Battery information at a glance When the light is off, press the power button once to display battery level for 3 seconds. Green or blue indicates 100%–30% charge, slow flashing indicates 29%–10%, and rapid green-and-red or blue-and-red flashing indicates less than 10% charge. Safety note: BL1500 has extremely high brightness. Do not look directly into the light source.