Skipdash™ Type I Fast-Dry Waterborne Acrylic Traffic Paint – 250 Gal Tote

Type I Fast-Dry Waterborne Acrylic Traffic Paint – 250 Gallon Tote- This ready-to-use 100% acrylic waterborne traffic paint delivers fast drying performance and solid durability for pavement markings. Formulated to meet Federal Specification TT-P-1952F Type I, it provides an economical solution for contractors and resellers handling parking lots, roadways, highways, driveways, sidewalks, and municipal or small airport striping. The paint applies cleanly over asphalt and Portland cement concrete surfaces and is supplied in convenient 250-gallon tote tanks for bulk users who want efficient volume pricing without the larger 275-gallon format.Key advantages include excellent adhesion, flexibility that holds up over time, and reliable no-track and no-pickup performance under a range of climatic conditions. It is designed for conventional or airless spray equipment and requires no thinning—just thorough mixing before use. Typical coverage is approximately 300 linear feet of 4-inch line per gallon at 15 mils wet film (or about 100 square feet per gallon at the same thickness). Field no-track time is generally under 90 seconds under ambient conditions, with no-pickup times under 10 minutes (without beads) and dry-through times under 120 minutes.Available colors: White, lead-free yellow, black, red, and blue (select via the product options). Packaging: 250-gallon tote only for these SKUs (other sizes available under separate listings).Application notes: Apply only when temperatures are at least 50°F and surface temperature is at least 5°F above the dew point. Surfaces must be clean, dry, and free of oil, grease, dirt, loose gravel, or flaking material. New asphalt or seal-coated surfaces should cure a minimum of 30 days. Do not thin with water. Protect from freezing. Store in a cool, dark place; best used within 3 months of delivery though usable up to 12 months. Clean equipment promptly with fresh water. This bulk tote option is ideal for resellers and high-volume buyers who want TT-P-1952F Type I compliance at strong wholesale pricing while serving parking-lot, roadway, and airport contractors. Spec sheets and SDS are available for verification—always confirm local requirements before application. We may substitute an equivalent specification-compliant product if needed.Coverage reminder: ~300 linear feet of 4" stripe per gallon @ 15 mils wet film. Caution: Keep from freezing. Do not apply in rain, on wet surfaces, or below recommended temperatures. Keep out of reach of children. Industrial use only. White Type I Traffic Paint Yellow Type I Traffic Paint