Solis S6-EH3P100K10-NV-YD-H 100 kW 3-phase Hybrid Inverter

The Solis S6-EH3P100K10-NV-YD-H is a powerful three-phase hybrid inverter for commercial and industrial energy systems with high-voltage batteries. With a rated output power of 100 kW and a maximum usable PV input power of 200 kW, this system provides maximum self-sufficiency capacity on a large scale. The inverter offers reliable backup functionality with a switching time of <10ms and can be scaled up to 1.25 MW through parallel operation. Designed for professional installations with the highest demands for power, stability and flexibility. PV capacity: Supports 200 kW maximum usable PV input power (recommended array size: 200 kW) via 10 MPPT inputs and up to 20 strings. Charge/discharge current: Maximum charge/discharge current of 200 A (100 A per port × 2 independent battery ports) for fast energy storage. Switching time: Backup power is activated in <10ms during a grid outage. Overload capability: 160% overload for 10 seconds and 200% for 200ms in off-grid mode for starting heavy loads. Scalability: Parallel operation up to 1.25 MW (Solis STS cabinet recommended when using more than 6 units). Battery compatibility: Compatible with 100–314 Ah Li-ion battery modules within a 300–950 V high-voltage range. 100 kW Commercial Hybrid Power with <10ms Backup – Solis S6 The Solis S6-EH3P100K10-NV-YD-H provides a robust solution for large-scale energy systems. With 10 MPPT inputs and up to 20 PV strings, a maximum input current of 10 × 42 A and a maximum current per DC input of 42 A, the inverter is compatible with high-power solar modules — including modules from Aiko and Trina Solar. The backup port provides a rated output power of 100 kW and supports peaks of up to 1.6× rated power for 10 seconds. Per phase, the inverter provides up to 33% of rated power. The system features two independent battery ports for flexible configurations and easy capacity expansion. With IP66 protection, an operating temperature range of -25°C to +60°C and patented Intelligent Redundant Fan Cooling, this system is designed for demanding operating conditions. Please note: The inverter weighs 170 kg — only use professional lifting equipment with sufficient load capacity during installation. The battery fuse may only be replaced by Solis-authorised personnel. Use approved 4.0–6.0 mm² DC cables (PV) and recommended 25–35 mm² battery cables for installation. Minimum clearance: 200 mm above, 450 mm left/right, 400 mm below and 1000 mm in front. Complete Technical Specifications – Solis 100kW Hybrid Inverter Specification Value Brand & Model Solis S6-EH3P100K10-NV-YD-H Rated Output Power 100,000 W (100 kW) Max. Usable PV Input Power 200 kW Recommended Max. PV Array Size 200 kW Max. Input Voltage (PV) 1000 V Rated PV Voltage 600 V Start-up Voltage 180 V MPPT Voltage Range 150–950 V Max. Input Current (PV) 10 × 42 A Max. Current per DC Input 42 A Max. Short-Circuit Current 10 × 60 A Number of MPPTs / Max. Strings 10 / 20 Battery Type Li-ion Battery Voltage Range 300–950 V Max. Charge/Discharge Current 100 A × 2 / 100 A × 2 Battery Ports / BMS Ports 2 / 2 Max. Current per Battery Port 100 A Battery Communication CAN Rated Grid Voltage 3/N/PE, 220V/380V; 230V/400V Rated Output Current 151.9 A (380V) / 144.3 A (400V) Max. Power per Phase 33% of rated power Backup Switching Time <10 ms Max. Backup Overload 1.6× rated power, 10 s / 2× rated power, 200 ms Max. AC Pass-through Current 151.9 A (380V) / 144.3 A (400V) Max. AC Grid Input Current 250 A Max. Efficiency 97.5% EU Efficiency 97.1% Max. Battery Charging Efficiency via PV/AC 98.2% / 97.0% Battery Discharge Efficiency 97.0% Dimensions (W×H×D) 1174 × 814 × 400 mm Weight 170 kg Protection Rating IP66 Noise Emission Not specified Cooling Intelligent redundant fan-cooling Operating Temperature -25°C ~ +60°C Max. Operating Altitude 3000 m Topology Non-isolated Self-consumption <45 W Display 7.0" LCD & Bluetooth + APP Communication WiFi + LAN + Bluetooth, CAN-BMS ×2, CAN-Parallel ×2, RS485-Meter, RS485, DRM, DI ×5, DO ×4; Optional: 4G Safety Standards IEC/EN 62109-1/-2, IEC/EN 61000-6-2/-4, EN 55011 Surge Protection DC Type II / AC Type II Warranty 5 years (extendable up to 20 years) Download Datasheet View Manual What is included with the Solis S6-EH3P100K10-NV-YD-H? The package includes: Inverter ×1, Back plate ×1, Hex Head Bolt Assembly M10×40 ×4, Flat Washer Ø10 ×4, Hex Nut M10 ×4, Phillips Hex Head Bolt M10×20 ×8, Expansion Bolt M10×70 ×4, Phillips Hex Head Combination Screw M8×20 ×2, RJ45 connector ×10, DC connector ×20, Through-wall terminal wiring cover ×5, Through-wall Terminal Cover (Black) ×2, Through-wall Terminal Cover (Orange) ×2, Handle ×4, CT ×3, CT cables ×1, Dual RJ45 Plug Shielded Cable Harness 5000mm ×1, Eastron Meter (optional) ×1, Lifting Buckle ×2, L-type spanner ×1, S2-WL-ST Data logger ×1 and Quick Installation Manual ×1. Check upon receipt that all components are present. If any items are missing, contact your Solis distributor. Which batteries are compatible with the Solis S6-EH3P100K10-NV-YD-H? The inverter is compatible exclusively with Li-ion high-voltage batteries within a voltage range of 300–950 V and a capacity of 100–314 Ah. The inverter features 2 independent battery ports (max. 100 A each) for flexible configurations: 1 battery connected to 1 DC port, 1 battery connected to 2 DC ports, or 2 separate batteries. Compatible battery brands (according to the official Solis Battery Matching List) include Pylontech and Dyness. Always consult the latest compatibility list on the Solis product page for the most recently approved batteries. What should I consider when installing this 100kW inverter? The Solis S6-EH3P100K10-NV-YD-H weighs 170 kg and requires professional lifting equipment with sufficient load capacity. Mount the inverter vertically on a non-combustible surface with a load-bearing capacity of at least 4× the weight of the unit. Maintain at least 200 mm clearance above, 450 mm on the left and right, 400 mm below and 1000 mm in front of the inverter. For multiple inverters, maintain at least 800 mm spacing. Installation must only be carried out by a qualified electrician. Use recommended 25–35 mm² battery cables, 70 mm² backup cables and 95 mm² grid cables. The system has an IP66 protection rating and is suitable for indoor and outdoor installation. Is this inverter Battery-Ready and does it work with SolisCloud? Yes. The Solis S6-EH3P100K10-NV-YD-H is fully Battery-Ready with two independent CAN-BMS ports for direct integration with approved high-voltage batteries. The integrated WiFi + LAN + Bluetooth connectivity makes it easy to connect the inverter to the SolisCloud platform for real-time monitoring, AI optimisation and remote troubleshooting. The inverter supports Time-of-Use (TOU) settings, dynamic reactive power compensation, export limitation and AC coupling with existing PV installations — ideal for large-scale C&I projects seeking maximum energy independence. Explore the complete range on our Solis inverter page.