ST-02 Steerable Engine Cart Kits For Retrol x OKMO B02 / B03 / B04 Hit And Miss Engine Model

No. ST-02 · Steerable Four-Wheel Engine Cart · For B02 / B03 / B04 The Engine Cart Every working farm engine had its cart. Now yours can too. On the farm, an engine rarely stayed in one place. It was mounted on a four-wheel cart with a steering front axle and pulled from the well to the woodpile to the barn, wherever the day's work was. At engine shows today, that is still how the best-loved engines are displayed. The ST-02 gives your RETROL & OKMO hit and miss engine the same setup. The axles mount beneath the engine's own wooden base, so the engine stays on its skids just as it does now. Only now it rolls, steers, and can be pulled along by its wooden tongue, just like the real thing. The finishing touch that makes a fine engine look like it just came in from the field. Made to Fit Designed for the RETROL & OKMO B02, B03 and B04 hit and miss engines. Wheel spacing and mounting holes match these engines, so it bolts straight on. No drilling, grinding or changes to your engine. Engines from other brands may not fit. Features Small Details, Period Correct Working Steering Front Axle The front axle pivots with the tongue, so the cart turns as you pull it, just as the full-size carts did when they were hauled across the yard. Wooden Pull Tongue & Brass Ring A long hardwood tongue with brass yoke and a brass pull ring at the end. Lift it and the whole outfit looks ready to be hitched up and taken to the next job. Black Six-Spoke Wheels Four 60 mm six-spoke wheels in black, with polished hubs and brass-tone brackets, the classic look of a farm engine cart. Mounts Under the Engine's Own Base No separate deck to swap in. The axles fit beneath the wooden base your engine already sits on, keeping the original look intact. Smooth Rolling, Light Weight Precision steel axles keep the wheels turning smoothly with minimal play. At about 185 g, the cart adds the look without adding bulk. Display, Show or Workbench Roll your engine from shelf to bench for running, set it out at a club meet, or simply give your collection a more complete look. Assembly An Enjoyable Hour at the Bench The ST-02 arrives as a kit, with some parts already assembled. Following the included instructions, you put together the axles, brackets and frame, then bolt your engine in place. All you need are 1.5 mm and 2.0 mm hex drivers (not included). What's in the Box & What You'll Need In the Box Front steering axle assembly Rear axle Wooden pull tongue with brass ring 4 × Six-spoke wheels Mounting brackets and connecting plates Spacer sleeves, screws, washers and nuts Assembly instructions You'll Need 1.5 mm hex driver 2.0 mm hex driver A RETROL & OKMO B02, B03 or B04 engine Specifications The Particulars (tap to view full specifications) Model RETROL & OKMO ST-02 Fits RETROL & OKMO B02, B03, B04 Type Steerable four-wheel engine cart Material Metal (axles, wheels, brackets) + wood (pull tongue) Assembly Kit, partially pre-assembled Pull Tongue Hardwood, brass yoke and pull ring Wheel Diameter 60 mm (2.4 in) Axle Length 115 mm (4.5 in) Tools Required 1.5 mm and 2.0 mm hex drivers (not included) Product Size 11.5 × 6 × 6 cm (4.5 × 2.4 × 2.4 in) Product Weight 185 g (6.5 oz) Package Size 12 × 8 × 8 cm (4.7 × 3.1 × 3.1 in) Package Weight 230 g (8.1 oz) Packaging Cardboard box Age 16+ Questions Frequently Asked Which engines does the ST-02 engine cart fit? The ST-02 is made for the RETROL & OKMO B02, B03 and B04 hit and miss engines. Engines from other brands may not fit. Do I need to modify my engine to fit the ST-02? No. The mounting holes match the B02, B03 and B04, so the engine bolts straight on without drilling or grinding. Is the ST-02 engine cart ready to use? It comes as a kit with some parts pre-assembled. You will need 1.5 mm and 2.0 mm hex drivers to finish the assembly, following the included instructions. Is the engine included? No. The ST-02 is the cart only. The B02, B03 and B04 engines are sold separately. ✦ ✦ ✦ A good engine deserves a proper cart.