Evercoat Mold Release for Polyester Resin, Epoxy Resin, and Gel Coat, 105685

Product Overview: Evercoat Mold Release for Polyester Resin, Epoxy Resin, and Gelcoat (105685) is a water-soluble liquid mold release that forms a smooth, parting film, allowing for a glossy finish on molded surfaces. Promotes complete cure of Polyester Gel Coat. One, eight fluid ounce bottle should cover approximately 20 sq. ft. Contains no hazardous ingredients. Water-soluble formula allows for easy cleanup and removal from mold or gelcoat with water. Sold as one, 8 fluid ounces (237ml) bottle. Features and Benefits: Mold Release for Polyester Resin, Epoxy Resin, and Gelcoat Water-soluble Forms a smooth, parting film, allowing for a glossy finish on molded surfaces Promotes complete cure of Polyester Gel Coat One bottle covers approximately 20 sq. ft Contains no hazardous ingredients; VOC = < 10g/L Easy cleanup and may be removed from mold or gelcoat with water Application: Mold Release is best applied by spraying. Apply with a small orifice spray gun using 90-100 psi or an aerosol spray (e.g. Preval). Spray at a distance of 12-18". Apply a mist coat followed by a heavier full wet coat. The product can also be applied with a soft bristle brush. Apply one full coat. Allow to dry approximately 30-60 minutes before applying resin to mold. Gel Coat - When used to promote the complete cure of Gel Coat, apply one full wet coat by spray or brush to the uncured gel coat surface. Allow gel coat to cure 4-6 hours before removing mold release. PVA Mold Release can be removed from mold or gel coat with water. Eight fluid ounces should cover approximately 20 sq. ft.