Dream Automotive | Wire Tow Loop And Bracket | Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016

Made in England. Dream Automotive wire tow loops are MSA compliant to Blue Book rule Q19.1.3 and are suitable for front or rear fitment to all car types. Overall length is 33cm, with a loop diameter of 13cm, the mounting plate bolt-hole centre ID is 15.00mm. The following MSA Blue Book configuration is strongly endorsed by Dream: Vehicles to be equipped with two front and one rear wire towing eyes positioned equally either side of the longitudinal center line. Dream Automotive wire towing eyes are made of 6mm diameter wire rope with a 6x19 wire strand core. Each towing eye has a breaking strain in excess of 2.35 tons and allows the passage of a cylinder with a diameter of 60mm, situated 25mm forward of the adjacent bodywork - 100 mm above and below this hole must retain clearance to enable the recovery crews to attach straps and shackles to recover the vehicle. This bracket has been designed specifically to suit the FK2 Civic Type R . Please note drilling is required for installation. Mounting bracket can be secured to the passenger or drivers side, we recommend installing a set both sides for extra safety. TECH SPECS MSA compliant tow hook to Blue Book rule Q19.1.3 Overall length 33cm Loop diameter 13cm 6 x 19 wire strand core Copper ferrules to prevent corrosion Bright colour plastic loop with pull tab Mounting bracket and hardware supplied COMPATIBLE VEHICLES Honda Civic Type R | FK2 2.0T K20C1 | 2015-2016 FITTING DETAILS Dream Automotive offers in-house fitting on all products at our workshop in Luton, Bedfordshire.