itsFPV ERA 5.5-Inch DC O4 Frame Kit

Same ERA DC. Same deadcat geometry. Built specifically for the DJI O4 Pro camera with stock plastic housing. The larger O4 camera required a redesigned cage and an extended front bottom plate. Everything else stays the same. NOTE: Frame kit only: Electronics, ELRS antenna holder, and action cam mounts are not included. O4 Pro version: This frame is for DJI O4 Pro with stock plastic camera housing ONLY. Color variance: SLS nylon color can vary slightly between production batches. Your cage may be lighter or darker than shown in the photos. The Cinematic Cage (O4) The O4 cage is manufactured through SLS (Selective Laser Sintering), not injection molding. Same nylon polymer, different process. SLS doesn't match the impact resistance of our injection-molded cages, but for cinematic work that's not the point. You're not hitting concrete walls. You're flying smooth lines. Want props out of frame AND carefree bashing? Check out ERA Mini 3.5" (zero props on O4 Pro) or pair the standard ERA DC with our CNC Conversion Kit for injection-molded durability. GoPro-style mounting system with a titanium M5 bolt. Stepless angle adjustment from -10° to 45°. No click-stops, no fixed increments. Set your angle with a 2.5mm hex key and it stays locked. Every pilot already has that tool. Why 5.5" Props Action cams keep getting heavier. The new GoPro Mission 1 Pro lands at 208g, a 1-inch sensor cinema cam that weighs about a third more than a Hero 13 and several times what a naked cam does. Put that on a standard 5" quad and you feel it in every corner, and flight times drop. 5.5" props give you the lift to carry a full-size GoPro without trading away the flight feel. More balanced, more responsive, longer flights. Still agile enough for dynamic lines. Geometry and Handling Deadcat layout pushes the front props out of your camera's field of view. No props in view, no post-cropping, no compromises on lens choice. The longer top plate shifts weight distribution for better balance with front-mounted action cams. The result: smooth, predictable handling for tracking shots and proximity work. Construction Interlock V2 arm system. Arms lock in with a form fit, secured with a single screw. No slop, no play. Easy to swap if you ever need to. Split deck design saves weight without losing rigidity. The cage bridges the structure, stiffening the entire chassis. Material Standards Same standards as ERA. No shortcuts. T700/T800 carbon mix with chamfered edges where it matters. 12.9 Grade YFS steel screws that don't strip. 7075 aluminum standoffs that don't bend. Titanium M5 bolt for the action camera mount – light, strong, won't seize. What's Different On the O4 Version O4 Cinematic Nylon Cage: Redesigned for the larger DJI O4 Pro camera. SLS manufactured from the same nylon polymer. Extended Bottom Plate Front: Longer carbon plate to match the O4 cage dimensions. Updated 3D Prints: O4 VTX Dual Antenna Holder, new TPU camera inserts. FAQ Will it carry a full-size GoPro? Yes. The GoPro-style mount and 5.5" props are built for full-size action cams, all the way up to the 208g GoPro Mission 1 Pro. Lighter and naked cams fit too. Is 5.5" the same as a 5-inch frame? It flies like a 5". Same agility, same feel. The extra prop disc just gives you the lift to carry a heavier camera and hold your flight time. A 5" that doesn't bog down under a full GoPro. How is this different from the standard ERA DC? This version is sized for the DJI O4 Pro with its stock plastic housing. The cage and front bottom plate are larger to fit the O4 camera. If you run O3, Vista, or Walksnail, or converted your O4 with our CNC kit, get the Standard 5.5-Inch DC ERA instead. Specifications: Standoffs: 7075 Aluminum Frame Geometry: Deadcat Hardware: 12.9 Hardened Steel Prop Clearance: Fits up to 5.5" Props Wheelbase: 238mm Stack Mounting: 30.5x30.5mm | 20x20mm Motor Mounting: 16x16mm Camera Mounting: Up to 20x20mm VTX Mounting: 20x20mm | 25.5x25.5mm Carbon: T700/T800 | Up to 55% Stronger Than Typical FPV Frames Camera Cage: SLS Nylon | Cinematic Protection Battery Straps: Nylon-Kevlar | Won't Snap on Impact LiPo Pad: Super Sticky | Keeps Battery In Place Cable Protectors: Injection-molded | Protects Motor Wires Action Camera Angle: GoPro Style | Stepless -10° to 45° Titanium Bolt: M5 | Light, Strong, 2.5mm Hex Motor Bell Protection: Three Point Motor Bell Protection Skids: Injection-molded Nylon | Protects Arms On Landing Arm Swap: One Screw Arm Swap Action Cam Swap: One Screw Action Camera Swap Assembly Guide Includes: 1x itsFPV ERA 5.5-Inch DC O4 Frame Kit SLS Manufactured 1X Nylon Cinematic Camera Cage Injection-Molded 4x Skids Carbon Fiber 1x O4 Bottom Plate Front CF 2.5mm T800 1x Bottom Plate Back CF 2mm T700 2x Front Arms CF 6mm T700 2x Back Arms CF 6mm T700 2x Back Arm Braces CF 6mm T700 1x Arm Connector CF 2mm T700 1x Top Plate CF 2mm T700 1x Interlock V2 CF T700 3D-Printed 4x O4 TPU Camera Inserts 1x AWG14 + 1x AWG12 Lead Holder 1x O4 Dual VTX Antenna Holder Hardware 4x 20mm Standoffs 7075 1x Hardware Set 1x Titanium M5 Bolt Miscellaneous 1x Super Sticky LiPo Pad 2x Nylon-Kevlar Battery Straps Download Assembly Manual