1,000 LPH Commercial Reverse Osmosis System

1,000 LPH, 4 x 4040 Industrial Reverse Osmosis Filtration System (<1500 mg/L TDS) The RO4 Series Commercial Reverse Osmosis System is a compact, energy-efficient solution designed for potable, tap, and low-brackish water treatment applications. 1,000 LPH commercial RO systems produce high-quality water at a very low cost, all of which are engineered using the most advanced technology for accurate and customised solutions. Engineered using high-quality components and advanced system design to deliver reliable performance and consistent water quality It has a SS skid frame with panel mounted components, easy system setup and relocation. Applications: • Commercial drinking water treatment • Food & beverage applications • Laboratories and Hospitals. • Hospitality and restaurants • Industrial process water • Pre-treatment for specialised water systems • Steam boilers, heating and cooling circuits • Glazing factories, laundry and car wash etc Specifications: Model RO4-4 Permeate Flow Rate * 1,000 LPH Recovery Rate * 50-70% (adjustable) Operating Pressure * 8 – 12 Bar (115-175psi) Inlet Water Pressure Min 2 Bar - Max 4 Bar (30-60psi) Feed Inlet Flow Min 715 LPH – Max 1,500 LPH Pre Filter 20” x 4.5” x 5 micron Filter High Pressure Pump Multi-Stage Centrifugal 304 Stainless Steel, 2.2kW. Membrane Housing 4 x 4”x40” FRP 300 psi RO Membrane 4 x 4040 Low Pressure Membrane Connections Inlet 32mm (1”) PVC Permeate/Drain: 25mm (3/4”) PVC Dimension 170 cm H x 110 cm W x 70 cm D * Flow, recovery and pressure depending on feed water quality and temperature. Feed Water Operating Requirements: TDS < 1500 mg/l (ppm) / Non Scaling Feed Water / SDI < 3 / Free Chlorine < 0.1 mg/l / Temperature 5-35° C / Inlet Pressure: 30-60 PSI (2–4 bar) @ inlet flow rate / pH 5-7.5 / Bacteria Nil / Silica Nil / Iron < 0.1 mg/l. Pre-treatment equipment not included (Softener, anti-scalant, sand or carbon filter…etc). Note: Performance will vary depending on raw water quality and temperature. Appropriate pre-treatment may be necessary. Contact us for details. Images are indicative only. Specifications subject to change without notice. Installed Features: 1 x 20” Sediment Pre-Filter (5 Micron) Inlet Solenoid Valve Low Feed Inlet Pressure Safety Switch High Pressure Pump: Multi-Stage Centrifugal 304 Stainless Steel (CNP, CDL Model) Low Pressure Piping & Fittings: UPVC High Pressure Piping & Fittings: 304 Stainless Steel Flush (Rinse) Solenoid Valve Inlet Inline TDS/Conductivity Monitor Permeate Inline TDS/Conductivity Monitor 2 x Product & Concentrate Flow Meter 3 x Pressure Gauge Emergency Stop Switch (Power On/Off Switch) SS 304 High Pressure Pump Discharge Valve, Check Valve & Concentrate Valve Frame: 304 Stainless Steel, with 2/4 Wheels Electrical Panel: Type: Stainless Steel Cabinet - Indoor Use. Parts: Main parts (Circuit breaker, Relays) by Schneider. ROC Microprocessor Controller: - Automatic control of feed pump, inlet solenoid valve, high-pressure pump, and product water tank level - Low-pressure and high-pressure protection functions. - Membrane automatic flushing function. - Indicators. Manual – Stop – Auto Selector Switch for: Inlet solenoid valve – Raw water feed pump – High pressure pump. Pilot light panel indicator for: Raw Water Tank full, Inlet solenoid valve, Low pressure switch, RO Pump, Pure water tank Full, flush Process. Emergency Stop Switch (Power On/Off Switch). Inlet Inline TDS/Conductivity Monitor. Permeate Inline TDS/Conductivity Monitor.