Satellite1.1 Smart Speaker

Say hello to the Fully Pre-Assembled Satellite1.1 Smart Speaker! A private, AI-powered voice assistant and two-way smart speaker, now with built-in human presence detection capabilities! Just open our custom-designed FPH box, plug-in the Sat1, connect to local or cloud AI and being controlling your smart home and playing music. No soldering, 3D printing, or assembly required, only beautifully crafted, room filling sound and a private AI voice assistant that works with Home Assistant and Music Assistant. Built for the Home Assistant and Music Assistant platforms, Satellite1.1 gives smart home enthusiasts all the sound, sensors, and voice capabilities they want in one product while preserving personal privacy and embracing modularity, upgradability, and customization. A special thank you to the community for your support! This milestone is a big achievement for us and we are excited to continue innovating with you! Yes, updated photos and video are coming. :) Key Features: Pre-Assembled & Ready to Use: Open the box, plug it in, and connect to Home Assistant. No soldering, no 3D printing or tools required. Private AI Voice Assistant: Your voice commands stay on your network — no cloud, no snooping. Powered by the Home Assistant voice pipeline. Optional Human Presence Detection: Slide the optional LD2450 mmWave sensor into the enclosure's built-in "stealth pocket" — no disassembly required. Use our Sat1 Radar Tuning user-interface to set your zones and receive realtime human presence detection. Enhanced WiFi Reception: External 2.4 GHz Wi-Fi antenna hidden in the enclosure's second "stealth pocket" for maximum WiFi Signal Strength. Enhanced Bass Port Enclosure: Get better sound and bass response from our latest ported enclosure. Enjoy Synchronized Multi-Room Music: Built-in Snapcast integration for synchronized music playback across every Satellite1 in your home (Sendspin support coming soon!). Stream music from Spotify (supports Spotify Connect), Apple Music (supports Airplay 1), YouTube Music and top music streaming services. Microphone Processing: 4-mic far-field high-performance microphone array powered by an XMOS audio processing chip, delivering echo cancellation, noise suppression, and noise cancellation.. (Yes, we're working on 4-mic beam-forming still. It's coming!) 20 Watt Amplifier and 2-Way Speaker Design: 3" mid-range woofer + 1.2" neodymium dome tweeter with a 2-way passive crossover for clear, powerful, room-filling sound. Headphone Line Out: Optionally connect to external amplifier via 3.5mm line out connection. Buttons & Controls: 4 programmable tactile buttons, including hardware mute for ultimate privacy. LED Animations: 360° addressable LED ring. Set your own custom colors. Built-in Sensors: Monitors room temperature, room humidity, and room brightness. Expandable: FX23L expansion connector for future accessories. Hackable & Transparent: Hex wrench included — crack the speaker open anytime. Open-source hardware, open-source firmware. Read our documentation at Docs.FutureProofHomes.ai Speaker Specs: 3" 15W Mid-Range Woofer (20W Peak @ 4Ω) Delivers clear, powerful mid-range with strong bass response Punchy 80Hz–6000Hz frequency response 78mm round frame with 86dB sensitivity 1.2" 15W Neodymium Dome Tweeter (20W Peak @ 4Ω) Smooth, detailed high-frequency response Clear 2.5k–20kHz frequency response Aluminum heat sink for stable performance 2-Way Passive Crossover Ensures clean distribution of high and low frequencies to each driver Processors: ESP32-S3: Dual-core 32-bit LX7, running at 240 MHz with 512 KB SRAM, 16 MB Flash, and 8 MB PSRAM. Audio Processor: XMOS XU316, 16-core 32-bit RISC running at 800 MHz with 3200 MIPS, 1024 KB SRAM, and 8 MB Flash. Sensors: Ambient Light: LTR-303ALS Temperature & Humidity: AHT20 Optional Human Presence Detection: Connect an optional LD2450 mmWave sensor via the new 4-pin connector — sensor slides into the enclosure's stealth pocket in seconds. 2 extra headers for direct mounting of LD2450 and LD2410. Enclosure: Professionally printed multi-material "mesh" smart speaker enclosure, engineered for strength, beauty, and sound (30% infill PETG) Available in two color choices: Charcoal Gray (33103) Bone White (33100) Front speaker chamber with stealth pocket for the optional LD2450 human presence sensor Back speaker chamber with stealth pocket for the external WiFi antenna and a bass port Top piece with multi-material buttons and LED diffuser Power Requirements: 30W USB-C Power Delivery adapter included (US, UK, or EU — select at checkout) Maximum: Boards support up to 20V @ 5A USB-C Power Delivery What's in the Box? Fully assembled Satellite1 Smart Speaker (Bone White or Charcoal Gray) USB-C Cable (2 Meters) USB-C Power Delivery Adapter (30W) Hex wrench — because your device should be yours to open Optional add-on: LD2450 mmWave human presence sensor and 4-pin connector cable. Firmware: ESPHome & XMOS Firmware is factory installed. Firmware updates arrive over-the-air (OTA) or by using our ESP Web Flasher. Modify the firmware using the ESPHome Dashboard Builder. Documentation: Satellite1 Smart Speaker Quick Start Guide Join the community at discord.futureproofhomes.net