Thempores WB

High Performance Heat Resistant Coating for Metal Surfaces Our water-based heat resistant coating system is designed to protect metal surfaces exposed to extreme temperatures, delivering long-term durability without compromising on environmental performance. Suitable for both industrial and commercial use, this coating provides reliable protection for steel structures, exhaust systems, chimneys, and other heat-exposed equipment. Developed as a modern alternative to traditional solvent-based systems, it offers the same high performance while reducing environmental impact. Key Features Water-based, low VOC formulation Withstands temperatures up to 600°C Suitable as a single coat or finishing coat Excellent adhesion to properly prepared steel Resistant to oil, diesel, and fuel exposure after curing Smooth matt finish available in selected colours Environmentally friendly alternative to solvent-based systems Typical Applications This system is ideal for metal components regularly exposed to elevated temperatures, including: Exhaust systems and pipework Chimneys and flues Industrial ovens and burners Steel structures in high-heat environments Engines and heat shields Barbecues, stoves, and heating equipment Heat resistant coatings like this are specifically developed to protect surfaces from thermal stress, corrosion, and rapid temperature fluctuations. Application & Surface Preparation For best performance, surfaces should be: Clean, dry, and free from grease or contaminants Mechanically prepared to remove rust and previous coatings Ideally blasted to SA 2½ standard The coating is typically applied using conventional spray equipment under controlled conditions, ensuring consistent coverage and film thickness. Coverage & Film Thickness Approximate coverage: 11–14 m² per litre Recommended dry film thickness: 25 microns Proper application ensures optimal performance, adhesion, and long-term protection. Drying & Curing This is an air-drying system, but full performance is only achieved after heat curing. Initial drying: Ambient conditions Full cure: Heating above 220°C for approximately 60 minutes This curing process activates the coating’s chemical resistance and durability. Why Choose This System? This coating offers a balance between performance, ease of application, and environmental responsibility. Compared to traditional high-temperature coatings, it provides: Lower environmental impact Safer application conditions Comparable heat resistance and durability Reliable protection for industrial assets Available from New Guard Coatings & Industrial Coatings Ltd At New Guard Coatings and Industrial Coatings Ltd, we supply high-performance heat resistant coating systems tailored for industrial applications. Whether you are protecting steel structures, manufacturing equipment, or high-temperature components, we can help specify the right system for your project. Get Expert Advice Not sure if this is the right coating for your application? Our team can recommend a full system based on: Temperature exposure Substrate type Environment Required lifespan 👉 Get in touch today for technical guidance or a tailored quotation.