Sashco TimberBright Log & Wood Cleaner - FREE SHIPPING

Sashco TimberBright™ – Any Species. One Effective Clean. TimberBright is a concentrated wood cleaner that removes mold, mildew and algae and dissolves everyday surface grime like pollen, dust and bird droppings, leaving a fresh, clean surface. It works on any wood species, finished or unfinished, and is also safe on metal, stone, brick, vinyl and concrete. Why use TimberBright? Bio-enzyme cleaning: enzymes surround, slightly dissolve and lift off dirt, pollen, mold and algae without etching the surface underneath Any species: won't discolor high-tannin woods like Cedar or Redwood No harsh acids or bleach: won't etch surfaces or keep breaking down wood fibers over time Plant safe when properly mixed and rinsed No rinse on interiors at a 1:10 mix. Just wipe and you're done Interior & exterior use, on wood, stone, brick, vinyl and more Mixing Exteriors: 1 part cleaner to 2 parts water, or as weak as 1:10, depending on how much cleaning you need Interiors: 1:10 (unless you can rinse thoroughly). No rinsing needed at this strength Application Remove loose debris. Wet down surfaces and nearby plants with clean water (cover sensitive plants). Apply bottom to top with a brush or sprayer. Let it sit for 5–20 minutes. Scrub stubborn areas along the grain with a soft-wash brush. Rinse top to bottom with clean water (warm water works best). Let the wood dry 24–48 hours before staining or finishing. Check with a moisture meter. Specs Coverage: 300–400 sq. ft. per gallon of mixed solution Application temps: 40°F – 90°F. Avoid direct sunlight Dwell time: 5 minutes minimum, 20 minutes maximum Dry time before coating: 24–48 hours pH 10–11 • Store between 50°F and 90°F, do not freeze Available in 1 gallon and 5 gallon concentrate Note: TimberBright is a cleaner, not a brightener. It won't reverse gray or yellow UV damage. For UV-damaged wood, use Sashco CPR Log Cleaner & Brightener (not for Cedar or Redwood). Always test a small, hidden area first.