SINET™ Accessory Cable

Overview The E-BikeKit SINET™ Accessory Cable is the main rider-control wiring harness used with current E-BikeKit SINET™ electric bike and trike conversion systems. It connects the SINET™ controller to the LCD, thumb throttle, and both locking e-brake levers using factory-installed waterproof connectors for a clean, reliable installation. Designed exclusively for current E-BikeKit SINET™ systems Factory-installed waterproof connectors One controller connection Dedicated LCD connection Dedicated thumb-throttle connection Dedicated left and right e-brake connections Important Compatibility Notice: This accessory cable is designed exclusively for current SINET™ electrical systems. It is not compatible with previous-generation E-BikeKit or E-TrikeKit wiring, Legacy Rescue Pack systems, or third-party electrical systems. Description The SINET™ Accessory Cable provides the primary connection between the SINET™ controller and the rider controls mounted on the handlebars. A single controller-side connection branches into dedicated connections for the SINET™ 3.5″ Color LCD, thumb throttle, left locking e-brake lever, and right locking e-brake lever. Each connector is keyed and matched to its SINET™ component to simplify installation and help prevent incorrect connections. If you are replacing an older E-BikeKit wiring harness and are unsure whether your system is SINET™ or Legacy, contact us before ordering. Photos of your existing controller, display, and connectors can help us identify the correct component. Connections The SINET™ Accessory Cable provides one controller connection and dedicated connections for each rider control: SINET™ Controller SINET™ 3.5″ Color LCD SINET™ Thumb Throttle Left SINET™ Locking E-Brake Lever Right SINET™ Locking E-Brake Lever Each connector is keyed to help ensure proper installation and reliable system operation. SINET™ System Compatibility Compatible With: Current E-BikeKit SINET™ conversion systems SINET™ Integrated Controller SINET™ External Controller SINET™ 3.5″ Color LCD SINET™ Thumb Throttle SINET™ Locking E-Brake Levers Not Compatible With: Legacy E-BikeKit or E-TrikeKit wiring harnesses Legacy E-BikeKit controllers Legacy E-BikeKit or E-TrikeKit LCDs and controls Legacy Rescue Pack electrical systems Third-party electrical systems Matching connectors alone do not confirm compatibility. All connected electrical components must belong to the current SINET™ platform. Specifications Brand: E-BikeKit Platform: SINET™ Harness Type: Main rider-control accessory cable Controller Connection: One LCD Connection: One Thumb Throttle Connection: One Left E-Brake Connection: One Right E-Brake Connection: One Connectors: Waterproof keyed SINET™ connectors What’s Included One SINET™ Accessory Cable Factory-installed waterproof connectors Controller, LCD, throttle, e-brake levers, and other SINET™ components are sold separately unless included as part of a complete conversion system. Installation Notes Disconnect the battery before installation Connect only to current SINET™ components Match each keyed connector to the appropriate component Verify all connectors are fully seated before powering the system Route the harness away from steering pivots, moving parts, and sharp edges Secure excess cable using appropriate cable ties Proper cable routing helps prevent abrasion, connector strain, and long-term electrical problems. Support Not sure whether your system uses SINET™ or Legacy wiring? Contact us before ordering and we'll help identify the correct harness. Questions? Call us toll-free at 1-866-882-3245, Monday–Friday, 9am–5pm ET, or email support@ebikekit.com.