ARCCAPTAIN CUT55 Pro Plasma Cutter Essential CUT Bundle

The Essential CUT Bundle combines the CUT55 Pro dual-voltage pilot arc plasma cutter with additional AG60 gun parts. The CUT55 Pro delivers up to 55A on 240V and up to 35A on 120V. Its non-contact pilot arc helps cut clean, rusty, painted, or coated conductive metal without touching the torch tip to the workpiece. The additional AG60 parts provide replacement wear items for routine cutting and torch maintenance. This package suits garage repairs, automotive work, maintenance, and general handheld fabrication. External Equipment Required: A clean, dry air compressor rated at least 90 PSI, 5 CFM, and 10 gallons. Bundle Highlights Full 55A Cutting Power: Use 240V for full output and up to a 1/2-inch clean cut. Flexible Dual-Voltage Input: Switch between compatible 120V and 240V power for different work locations. Non-Contact Pilot Arc: Start cuts on rusty, painted, or dirty metal without touching the torch tip. Extra AG60 Parts Available: Keep compatible wear parts nearby for routine torch maintenance. Fewer Separate Parts Orders: Get the cutter and additional AG60 parts in one purchase. What's Inclused? Included Item Purpose 1 × CUT55 Pro Plasma Cutter Provides up to 55A output on 240V and up to 35A on 120V. 1 × Preinstalled Air Compressor Filter Helps reduce moisture and contaminants entering the torch air supply. 1 × AG-60 Cutting Torch with Accessories Directs the plasma arc for handheld cutting with compatible AG60 wear parts. 1 × 200A Ground Clamp with DKJ 10-25 Connector Completes the electrical cutting circuit through the conductive workpiece. 1 × Gas Hose Carries compressed air from the external compressor to the cutter. 2 × Hose Clamps Secure the air hose at its connection points. 1 × 240V-to-120V Voltage Adapter Supports connection to compatible 120V power when required. 1 × Carry Strap Helps carry the 11.5 lb cutter between work areas. 1 × Operator Manual Provides setup, operating, and safety instructions for the CUT55 Pro. 1 × Dust Cover Helps keep settled dust off the stored machine. AG60 Gun Parts These compatible wear parts replace used AG60 torch components, helping maintain cutting performance and reduce unplanned stops. CUT55 Pro Technical Specifications Specification Product Information Model CUT55 Pro Product Type Dual-Voltage Pilot Arc Plasma Cutter with App Control Input Voltage 120V / 240V AC, Single Phase, 50/60 Hz Maximum Output 55A on 240V; 35A on 120V Output Current Range 20–55A on 240V; 20–35A on 120V Rated Input Capacity 9.4 kVA on 240V; 5.5 kVA on 120V Cutting Process Handheld Plasma Cutting with Pilot Arc Clean Cut 240V: Up to 1/2 in.; 120V: Not separately specified Maximum Severance 240V: Up to 3/4 in.; 120V: Not separately specified Arc Starting Method Non-Contact Pilot Arc Supported Materials Mild Steel, Carbon Steel, Stainless Steel, Aluminum, Copper, and Other Electrically Conductive Metals Torch / Consumables AG60 Plasma Torch and Compatible AG60 Consumables App Control Bluetooth App Control for Remote Adjustment and Machine Monitoring Trigger Modes 2T / 4T Post-Flow Time 5 Seconds Operating Air Pressure 29–72 PSI Recommended Air Supply At Least 90 PSI, 5 CFM, and a 10-Gallon Tank Duty Cycle 60% No-Load Voltage 330V Cooling System Air-Cooled with Smart Fan Control Protection Features Smart Fan Cooling and IP21S Enclosure Efficiency 85% Insulation Class Class H Dimensions 17.8 × 9.6 × 6.1 in. Weight 11.5 lb CNC Compatible No Warranty 3 Years