Bykski Durable 360mm AIO Liquid GPU Cooler For NVIDIA GeForce RTX 4080 SUPER 32GB (B-FRD-RTX4080S-SR-360)

The Bykski B-FRD-RTX4080S-SR-360 is a sealed all-in-one liquid cooling kit for the NVIDIA GeForce RTX 4080 SUPER 32GB. Radiator, inline pump, tubing, fans, and water block arrive pre-assembled, pre-filled, and pre-bled with no loop to build.This sealed kit transfers heat from the GPU chip, memory, and power stages directly to a 360 mm radiator. Placing the 7000 RPM pump inline in the tubing keeps vibration off the card for quieter operation and flat contact across the circuit board.Specifications Water Block: T2 copper, electroless nickel, 277.64 x 101.95 x 17.0 mm Radiator: 396 x 120 x 38 mm, 63 mm with fans Fans: 3 x 120 mm PWM Pump: Inline, 7000 RPM Fits: a 360 mm radiator position with 63 mm of depth, plus the card with the block on it Compatibility ONLY Compatible with: NVIDIA GEFORCE - RTX 4080 SUPER 32GBParts Included GPU water block with backplate: pre-assembled with 360 mm radiator, inline pump, and tubing (pre-filled) Cooling fans: 3 x 120 mm PWM Thermal interface: Thermal pads for memory and power stages Thermal paste: 1 tube for GPU chip Mounting hardware: spring screws, backplate screws, washers Warnings Warranty is repair or replacement. All returns are accepted within 30 days, no questions asked. An installed or used item comes back at a higher restocking fee. The loop is sealed, pre-filled and pre-bled. Do not open it, do not modify the tubing and do not attempt to top it up. Doing so can cause a leak or a pump failure. Removing the stock cooler from a passively cooled card means it can no longer run on chassis air. Do not power the card without the kit installed and the pump running. Fitting the kit means removing the stock cooler and exposing the GPU chip. Thermal pads go on the memory and the power stages; thermal paste goes on the GPU chip. The manufacturer reserves the right to alter the design to expand compatibility, so the delivered item may not match the pictured item exactly. This product is for self-installation by qualified users. Not responsible for any damage caused by or when using this product. Please use at your own risk.