MH12 V2 - 1200 lumens

For professionals who keep moving when the work runs long. 1,200 lumens. 202 metres of throw. The battery comes out and gets swapped on the job. Removable 21700 battery, carry a spare and swap in seconds Also runs 18650 or 2× CR123 / RCR123 via included magazine USB-C rechargeable with protected port cover Up to 1,500 hours on ULTRALOW Tactical tail switch + metal side switch Two user modes: Daily and Tactical IP68 rated, 2 m submersible, 1 m impact resistance HA III hard-anodized aero-grade aluminium Includes NL2150 5,000 mAh battery and NTH10 holster The battery comes out. That's the whole point. Most rechargeable flashlights lock you in. Battery sealed inside, charged through one port, and a full charge cycle every time the cell taps out. The MH12 V2 takes a different approach. The included NL2150 21700 cell pops out and swaps in seconds. Carry a spare in your pocket, drop it in when the first one taps out, and keep moving. Three battery formats, one flashlight. The included magazine adapter lets you run a single 18650 cell, or 2× CR123 / RCR123 cells, in the same body. If you already run 18650s in other lights, those work here too. And if you're building an emergency stockpile, primary CR123 cells sit on a shelf for around a decade and still deliver light when you need them. When the battery starts losing capacity after a few years of use, replace just the cell, not the whole flashlight. WHAT MAKES THE MH12 V2 WORTH THE CARRY Hot-swappable battery Pop a fresh 21700 in seconds. No proprietary battery pack, and no waiting for a charge cycle to keep working. ANSI/PLATO FL1 tested Output, throw, and runtime figures are measured against the international flashlight testing standard, not internal marketing claims. Non-PWM constant current Steady beam with no visible flicker at low brightness. Easier on the eyes during extended use. Full kit included NL2150 5,000 mAh battery, USB-C cable, NTH10 holster, detachable clip, lanyard, 18650/CR123 magazine, spare O-ring and tail switch cover. Ready to work out of the box. A clean, far-reaching beam that holds steady. The CREE XP-L2 V6 LED sits behind a smooth reflector tuned with Nitecore's Precision Digital Optics Technology (PDOT) and a crystal coating. The result is a clean white beam with useful spill and 202 metres of throw on full output. Bright enough to identify someone across a car park, tight enough to pick out detail at distance. Non-PWM constant current circuit. Brightness holds steady at every level. No visible flicker at low output, no strobing-at-dim annoyance that some cheaper lights show. The eye reads it as a clean, continuous light source. The LED is rated for 50,000 hours of operation, so the light element itself will outlast most of the gear in your kit. Tactical tail switch for fast on, fast off. Light pressure for momentary-on. Click for constant-on. The way a serious flashlight should work. Half-press gives you a quick look that releases when you lift your thumb. Full-press locks the light on for hands-free operation. The textured rubber boot finds your thumb in the dark, gloves on or off. Metal side switch for everything else. The metal side switch handles brightness cycling, STROBE, mode switching, and battery checks. Solid tactile click that registers through work gloves. FOUR BRIGHTNESS LEVELS: ULTRALOW, LOW, MID, HIGH. Cycle through them with quick presses. POWER INDICATOR: A blue ring under the side switch shows remaining battery and can display battery voltage to within 0.1 V. Useful when you're rotating cells between multiple lights and want to know which one is freshest. MEMORY FUNCTION: In Daily Mode, the light wakes up at the brightness you last used. No cycling through modes to get back to where you were. TWO USER MODES: Daily Mode (the default) gives all four brightness levels plus STROBE, BEACON, and SOS. Tactical Mode strips it down to four brightness levels and STROBE only, for a simpler cycle that excludes BEACON and SOS. USB-C charging on board. Built-in USB-C port. The same cable that charges your phone, laptop, and earbuds tops up the flashlight. No proprietary cable to lose, no separate charger to pack. A full charge from empty takes around 4 hours with the included 5,000 mAh battery. The port lives under a rubber cover that seals against water, dust, and impact. With the cover closed, the flashlight maintains its full waterproof rating, so you can run the light in heavy rain or wash it under a tap after a muddy job. Built to take a beating. AERO-GRADE ALUMINIUM WITH HA III FINISH: The hardest commercial anodize spec available. Resists scratching, abrasion, and the daily knocks of a tool that lives in a tool roll, glove box, or jacket pocket. IP68 RATED, 2 M SUBMERSIBLE: Full dust-proof and waterproof to 2 metres. Drop it in a puddle, fish it out, keep working. Hose it down with confidence. 1 METRE IMPACT RESISTANCE: Survives the everyday drops onto concrete, gravel, or workshop floors that put cheaper lights out of commission. OPTICAL LENS WITH DOUBLE-SIDED SCRATCH-RESISTANT COATING: The front face holds up to grit, dust, and the occasional scrape against a doorframe or workbench. ELECTRONIC REVERSE POLARITY PROTECTION: Drop in a cell the wrong way and nothing breaks. The circuit recognises and refuses. ATR (ADVANCED TEMPERATURE REGULATION): A patented thermal regulation module monitors body temperature and adjusts output to keep performance stable when sustained high output heats things up. Patent No. ZL201510534543.6. WHERE THE MH12 V2 EARNS ITS KEEP Maintenance & Field Work Contractors, electricians, technicians, mechanics. Trace wiring in a panel, read serial plates in a service truck, inspect a job in a dim plant room. Outdoor & Adventure Hiking, camping, fishing, climbing. Bright enough to throw across a campsite or down a trail. Long enough on low to outlast the trip. Emergency & Response Power outages, roadside breakdowns, S&R volunteer callouts. CR123 primaries on standby mean you have light when the grid is down. Patrol & Property Security teams, neighbourhood watch, property managers, gated estate work. Quick draw from the included NTH10 holster, brightness levels for different sight lines. OUTPUT AND RUNTIME MODE LUMENS RUNTIME DISTANCE HIGH 1,200 3h 45min 202m MID 300 8h 102m LOW 55 46h 42m ULTRALOW 1 1,500h 6m STROBE 1,200 - - BEACON 1,200 - - SOS 1,200 - - *CERTIFIED ANSI/PLATO FL1 2019 Standard ANSI/PLATO FL 1 2019 is the international flashlight performance standard. Runtimes and outputs above are measured using the included NL2150 5,000 mAh 21700 cell under laboratory conditions. Real-world figures may vary slightly based on temperature, battery age, and usage pattern. STROBE frequency: 16-20Hz, randomly changing. TECHNICAL SPECS LED CREE XP-L2 V6 (50,000-hour lifespan) Reflector SMO with PDOT & Crystal Coating Peak Beam Intensity 10,200 cd Battery Required 1× 21700, 1× 18650, or 2× CR123 / RCR123 Charging Port USB-C, ~4 hour full charge Special Modes STROBE / BEACON / SOS User Modes Daily Mode / Tactical Mode Circuit Constant Current (Non-PWM) Temperature Control ATR (Patent ZL201510534543.6) IP Rating IP68, 2 m submersible Impact Resistance 1 metre Body Material Aero-grade aluminium, HA III hard-anodized Length 158 mm / 6.22" Head Diameter 25.4 mm / 1.00" Tail Diameter 27.2 mm / 1.07" Weight 84.5 g / 2.98 oz (flashlight only, no battery) View Full Product Page (Nitecore.com) BATTERY COMPATIBILITY BATTERY TYPE SIZE / VOLTAGE WORKS? NOTES Nitecore NL2150 (5,000 mAh) - Included 21700 / 3.6V Yes Full performance, full runtime spec Other 21700 Li-ion 21700 / 3.6~3.7V Yes Performance depends on cell quality 18650 Li-ion (with included magazine) 18650 / 3.6~3.7V Yes Reduced runtime vs 21700 2× CR123 Primary (with included magazine) CR123A / 3V Yes Non-rechargeable. Useful for emergency stockpile (~10-year shelf life) 2× RCR123 Rechargeable (with included magazine) RCR123 / 3.7V Yes Reduced runtime vs 21700 AA, AAA, or any other size - No Not compatible FREQUENTLY ASKED QUESTIONS How long does it take to fully charge? Around 4 hours from empty to full via USB-C with the included NL2150 5,000 mAh battery. Charging time will be shorter if you're topping up from a partial discharge, or if you swap in a smaller 18650 cell. Can I use it with non-rechargeable batteries in an emergency? Yes. The included 18650/CR123 magazine adapter accepts 2× CR123A primary cells, which have around a 10-year shelf life. That makes the MH12 V2 viable as part of an emergency stockpile, since the primaries can sit unused on a shelf for years and still deliver light when the grid is down. Performance and runtime will be different from the 21700, but the light will work. What's the difference between Daily Mode and Tactical Mode? Daily Mode (the factory default) gives you all four brightness levels plus STROBE, BEACON, and SOS. Tactical Mode strips it down to four brightness levels and STROBE only, for a simpler cycle that excludes BEACON and SOS. You switch between modes by clicking the tail switch while holding the side button. What's In The Box 1× MH12 V2 Flashlight: 1,200 lumen USB-C rechargeable, ready to run 1× NL2150 5,000 mAh Rechargeable Battery: Nitecore's 21700 high-capacity cell 1× NTH10 Tactical Holster: Rigid kydex-style quick-draw holster, fits duty belts and MOLLE webbing 1× 18650 / CR123 Battery Magazine: Adapter sleeve for running 18650 or 2× CR123 / RCR123 cells 1× USB-C Charging Cable: For topping up directly 1× Detachable Pocket Clip: Attaches to a pocket, backpack strap, or MOLLE webbing 1× Lanyard: Wrist tether for active use 1× Spare O-ring: Maintains the IP68 seal long-term 1× Spare Tail Switch Cover: Replacement for the textured rubber boot Add it to your kit. GET YOUR MH12 V2 NOW