B.O.T.C.K - Bolt On TrackBar Correction kit Gen3 Tundra – Blemished

This is a blemished (B-stock) Bolt-On TrackBar Correction Kit, fully functional and discounted purely for cosmetics. Blems can include things we didn't catch before powder coat (small weld splatter, a minor gouge, scratch, or ding), a scuff or scratch in the coating, light marks from test-fitting, or chipped powder coat from a drop. None of it affects fit, function, or strength. Same kit, same performance, just a cosmetic discount. Fits: Gen 3 Toyota Tundra (5-link rear suspension) What It Does Fixes that sketchy, side-to-side axle swing after a lift. Brings your track bar (panhard bar) back to a more natural, level position. Keeps your rig tracking straight, planted, and predictable on-road and off. Bolt-on design — no welding, no guesswork. Standard height brackets can potentially contact frame under suspension cycle! Shorty bracket is not available for all models. All brackets on the market have the same potential! Why It Matters When you lift your rig, the track bar angle gets steep. That forces the axle to swing left/right instead of moving up/down — making the rear feel unstable. The B.O.T.C.K. raises the pivot point to flatten that bar and bring your handling back to normal. Simple fix, huge difference. Shorty vs. Regular – Pick the Right One How to Pick the Correct B.O.T.C.K. Version Park on level ground. Measure from the ground to the center of the frame-side track-bar bolt. Measure from the ground to the center of the axle-side track-bar bolt. Subtract the two measurements to find your bolt-height difference: 1.5"–2.99" → Shorty Version (or use the bottom hole on the Standard bracket) 3" or higher → Standard Version (use the top hole) Planning to lift higher later? Go with the Standard Version — it gives you extra mounting options as your suspension height changes. Updates You Need to Know No more flange nuts – now standard hex nuts. Washer for side bolt no longer needed. KDSS or non-KDSS? Doesn’t matter. Works with both. Real Talk Stop buying parts you don’t need — understand what it does before hitting checkout. This kit isn’t just stronger than weld-on options — it spreads load evenly across the OEM mount instead of depending on the welds. Designed for rigs that actually see dirt, not just mall crawlers. What’s Included Front bracket Back bracket Flag nut (1x) M14 x 1.5 x 75mm flange head bolt (1x) M14 x 1.5 x 80mm flange head bolt (2x) M14 x 1.5 x 35mm flange head bolt (1x) M14 hex nut All hardware is zinc coated Fulfillment Time: Please allow 36–48 hours. UPDATED: (Torque bolts to 105 ft lbs oem bolt location 120-125lbs on the rest . Use blue loctite or very little red )