LiteOn 12V/3.3A 40W Power Adapter

LITEON 12V/3.3A 40W Power Adapter - PA-1041-81 This series is a class 1, single-output AC to DC 40W green adapter with C14 inlet type. It can be operated from AC 90V~264V with good efficiency performance for various ITE, industrial and networking application. It also complies world-wide Safety and EMC regulations. Features DC Plug 5.5 × 2.5 mm AC Input 90–264 VAC, C14 socket (withstand 300 VAC surge for 5 seconds) Protections Short-circuit, Over-voltage, Over-current, Over-temperature Efficiency DOE Level VI compliance Standby Power Low consumption Safety Certifications Global safety approvals, IEC/EN 62368-1 compliance Operating Temperature 0 ~ +40 ℃ Operating Altitude Up to 5000 meters LED Indicator Yes Reliability High reliability design Warranty 1 year Dimensions (L × W × H) 114.2 mm × 51.5 mm × 32 mm Electrical Specification Category Parameter Specification Rated Power 40W Voltage 12V Current 3.33A Ripple & Noise (max.) 100mV Regulation Line & Load ±5% Timing Hold-up Time (typ.) 10ms AC ON Delay / Rise Time (max.) 3 sec / 30ms Input Rated Voltage Range 100–240 VAC Operating Voltage Range 90–264 VAC (300 VAC for 5 sec) Current (max.) 1.2A @ 100 VAC Inrush Current No component damage (< I²t) Frequency Range 50–60 Hz Leakage Current Max. 0.25mA @ 240 VAC Efficiency Average Efficiency (typ.) 88% Protections Over-voltage Max. 150% of rated voltage, latch-off protection Over-current Max. 160% of rated current, hiccup mode until fault removed Short-circuit No damage, hiccup mode until fault removed Over-temperature No damage, auto recovery after cooling MTBF Min. 500K hours @ rated load Environment Temperature Operating: -20~70℃ / Storage: -40~85℃ Humidity Operating: 10–90% RH (non-cond.) / Storage: 5–95% RH Altitude Max. 5000 meters Mechanical Dimensions (L×W×H) 114.2 × 51.5 × 32 mm Weight 215 g (typ.) Vibration 10–500 Hz, 5G, 20min/cycle, all axes (X, Y, Z) Safety Standards IEC/EN 60950-1, K60950-1, IEC/EN 62368-1, CNS14336-1 Withstand Voltage Input–Output: 4242 VDC / Input–FG: 2150 VDC Isolation Resistance (min.) Input–Output: 30MΩ @ 500 VDC, 25℃, 70% RH EMC EN55032 (CISPR32) Conducted EMI: Class B / Radiated EMI: Class B FCC Conducted EMI: Class B / Radiated EMI: Class B EN61000-3-2 Harmonic distortion: Not applicable EN61000-4-2 ESD: ±8kV contact / ±15kV air discharge EN61000-4-3 Radiated RF immunity: 3V/m EN61000-4-4 EFT: ±1kV (AC port) EN61000-4-5 Surge: ±2kV DM / ±4kV CM EN61000-4-6 Conducted RF immunity: 3V/m EN61000-4-8 Magnetic field immunity: 3A/m EN61000-4-11 Voltage dip immunity Notes #1: All specification defined at 230Vac/50Hz, rated power and 25℃ ambient temperatures if not mentioned specifically. #2: Ripple noise is measured with 0.47uF MLCC & 47uF low ESR capacitor. #3: Calculated by Telcordia SR332 at 25℃ ambient temperatures. #4: When operating altitude is higher than 2000m, the environment temperature derating factor is 0.36℃/100m. Resources Datasheet Package Includes 1x Power Adapter Note: Power cord is not included in the box.