Doepfer - A-190-9 Micro MIDI-to-CV/Gate Interface

Module A-190-9 is a simple Midi-to-CV/Gate interface. It is planned for applications where the more sophisticated functions of the other midi interfaces of the A-190-x series are not required. These are the most important features of the A-190-9: simple monophonic midi-to-CV/Gate interface 3.5 mm stereo socket as midi input, can be internally adjusted to one of the two versions of the 3.5 mm midi standards by means of two jumpers. the midi input can be normalled to the midi output of another A-100 module by means of Arduino cables, provided that the other module features an internal midi output (e.g. A-155-2, A-198-2) particularly the CV voltage of the A-155-2 can be output in quantized form three CV outputs, 1V/Octave (3-fold multiple) CV output range 0...+5V the CV output is controllen via midi by note messages, the midi reference note number 36 corresponds to 0V CV the module responds only to the note numbers of midi note-on/off messages (no velocity, no pitchbend, no control changes, no clock) the scale of the CV output can be adjusted by means of a multi-gang trimming potentiometer (factory setting: exactly 1.00V/octave) two gate outputs (2-fold multiple) gate level 0/+10V LED display for gate status factory settings: midi channel 1, midi reference note 36 (for 0V CV), the midi channel can be modified by the user with the help of some solder joints can be used also as a simple breakout module for midi in/out (e.g. for A-155-2, A-198-2) Specs: Width: 2 HP / 10.0 mm Depth: 45 mm measured from the rear side of the front panel Current: +30mA (+12V) / -10mA (-12V)