Gates Powergrip® EPDM Closed Loop 1.5GT 6/9mm Timing Belt

9mm Width or 6mm Width with 1.5mm pitch, depending on your selection Glass-Fibre reinforced EPDM in closed 1900.5mm rubber belt intended for 3D Printers (suitable enough for most core xy printer up to 350mm printer size as typically for voron a/b per axis is approx 1800mm for 350mm) A uniquely designed tooth profile distributes the load over the entire belt, allowing the belt to withstand greater loads Quiet, durable, and strong. Rated for -45C to 135C temperatures (best suit for high temp chamber won't degrade and become brittle as quickly as standard belts, similar will generate less belt dust compare to cheaper belts) as regular belts are only rated up to 80°C or less. Closed Loop Belt, as open ended belts are spiral cut (by automated machines) so its be cut at much longer lengths but as its cut a slight angle this cause some skew, a close belt improve pulley walking and premature wear but the downside those are require to be cut and sometimes waste some length when cutting them open and to length. These are genuine Gates products, distributor certificate available on request from our supplier.