Performance Maintenance and Repair Kit for TILLIV Vacuum Packing Cubes

Three things go wrong with a vacuum pack: the zipper picks up grit, the zipper dries out, and something puts a small hole in the fabric. The TILLIV Performance Kit covers all three in one pouch, which is cheaper and considerably less annoying than buying the parts separately when you already have a problem. Inside are four repair patches at 5 x 5 cm, five zipper lubricant wipes, and a five-gram tube of zipper gel. That is enough to keep a set of packs in service for a long time. For regular maintenance Run a lubricant wipe along the length of the zipper to lift off fibres and dust. Follow with the gel: a pea-sized amount into each side of the zipper head, then open and close the zipper five times to spread it. Store the pack with the zipper closed. For a puncture The patches are for small holes in the body of a pack, not for leaks at the zipper. Clean and dry the area, cut the patch down if you need to, peel the backing, lay it over the hole, and press firmly to work out the air bubbles. Leave it flat for thirty minutes before using the pack again. Why Shop with Us Repairing bags is what we do in New Berlin, Wisconsin, so we have a settled view on this: the packs that last are the ones that get ten minutes of attention twice a year. If a pack is past patching, bring it in and we will tell you honestly. What is in the kit Repair patches — 4 pieces, 5 cm x 5 cm Zipper Lubricant Wipes — 5 wipes Zipper Gel — one 5 g tube Specifications Item number: TLV-PKT Weight: 5.9 oz Works with: All TILLIV vacuum packs Important to Note Patches are for holes in the body of a pack, not for zipper leaks. Do not ingest the gel or the wipes. Keep away from babies, children and pets.