Sprite/Midget GPS Speedometer - 100mm (1962-1967)

NOTE: FOR NEGATIVE GROUND CARS ONLY. If your speedo or odometer is not working, this product is the answer! Easy to install and complete, this speedo will have your car reading accurate speed and distance on day one! No more speedo cable! No more jumpy needle! No more broken odometer! No more wacky and inaccurate readings! Go GPS! While we are passionate about the original instruments, there’s a lot to love about this GPS driven unit. Original speedometers were never perfectly accurate, and if you start changing your tire size and rear end ratio, you will find the speedo only gets more inaccurate. In comparison, this new GPS speedo is accurate all day long, and looks very similar to the original gauge that came in these cars. These are exactly the same size as the original gauges and fit right into the existing holes on your dashboard. We sourced these gauges to mimic the original gauges because we've had lots of Sprite and Midget owners who like our Bugeye GPS Speedometer and Electronic tach, but wanted ones to match their vintage. Therefore, we also have a matching electronic tachometer for these cars as well - add a new electronic tachometer by clicking here! You will need to stick the small waterproof GPS antenna on your dashboard, so your new GPS gauge can connect to a satellite. These gauges are able to work with your top because it can pick up the signal through the glass if the antenna is on the dash. Negative ground required. Very low voltage drain. Easy to wire-up. Instructions included. If you have the wrong speedo or a non-working speedo or odometer, you will love this product! Don't be afraid to convert your car to negative ground-call if you are unfamiliar-change to negative ground and you can use this product. INSTALLATION NOTE: These require a 3-7/8" inch gauge hole - it's a 4" gauge including the bezel. This will not fit on later British cars with a smaller gauge. Click here to view our full catalog!