ALINX AXW49: Xilinx Zynq UltraScale+ RFSoC XCZU49DR FPGA Development Board

Features What's Included Resources & Downloads Description AMD Zynq™ UltraScale+™ RFSoCs - The Industry’s Only Single-Chip Adaptable Radio Platform AMD Zynq™ UltraScale+™ RFSoC Gen 3: Quad-core Arm Cortex-A53 MPCore up to 1.33 GHz Dual-core Arm Cortex-R5F MPCore up to 533 MHz 16nm FinFET+ Programmable Logic Soft-decision forward error-correction cores (SD-FEC) Source: https://www.amd.com/en/products/adaptive-socs-and-fpgas/soc/zynq-ultrascale-plus-rfsoc.html AXW49 is a High-End SDR board with XCZU49DR FPGA + Kontron X86 COME, equipped with 16×14-bit 2.5GSPS RF-ADCs, 16×14-bit 9.85GSPS RF-DACs, 8GB DDR4, 2x QSFP28, 1x FMC+, GPS, 16T16R RF MCX ports, built for direct RF processing. Ideal for 5G, Radar, Satellite, and Test and Measurement. Ideal for: 5G and LTE Wireless Remote-PHY for Cable Access DOCSIS 3.1 Phased Array Radar/Digital Array RADAR Test & Measurement Satellite Communications This is a single board design. For a SOM + Carrier with XCZU49DR check out our AXRF49. FPGA Specification FPGA XCZU49DR-2FFVF1760E (note the Temperature Grade being E) 14-bit RF-ADC w/DDC 16x, Max Rate (GSPS) 2.5 14-bit RF-DAC w/DUC 16x, Max Rate (GSPS) 9.85 Number of DDCs per RF-ADC 1 RF input Freq max. GHz 6 Decimation / Interpolation 1x, 2x, 3x, 4x, 5x, 6x, 8x, 10x, 12x, 16x, 20x, 24x, 40x Processors 4x ARM Cortex-A53, 1.333GHz 2x ARM Cortex-R5F, 533MHz High-Speed Connectivity 4 PS-GTR; PCIe Gen1/2; Serial ATA 3.1; DisplayPort™ 1.2a; USB 3.0; SGMII General Connectivity 214 PS I/O; UART; CAN; USB 2.0; I2C; SPI; 32b GPIO; Real Time Clock; Watchdog Timers; Triple Timer Counters GTY 16x Chip Level Extended Grade Speed Grade -2 Working Temperature -40℃~70℃ System Logic Cells (K) 930 CLB LUTs (K) 425 Max. Dist. RAM (Mb) 13.0 Total Block RAM (Mb) 38.0 UltraRAM (Mb) 22.5 DSP Slices 4,272 1.8V High-Performance (HP) I/Os 312 3.3V High-Density (HD) I/O 96 Board Features DDR4 PS: 4x 1GB DDR4, total 4GB, 64bit Bus, Data Rate 2400Mbps PL: 4x 1GB DDR4, total 4GB, 64bit Bus, Data Rate 2400Mbps QSPI FLASH 2x 1Gbit, for user data storage QSFP28 2x M.2 1x NVME M.2 (PCIEx4), for M.2 SSD storage DisplayPort (COME) 1x DisplayPort USB 3.0 (COME) 1x USB3.0, (Type-A, HOST, SLAVE), for external USB devices USB 3.0 (PS) 1x USB3.0, (Type-A, HOST, SLAVE), for external USB devices JTAG 14-pin 2.00mm Standard JTAG port for Program Debug and Download UART on Expansion port J11 Ethernet Interface (PS, PL, COME) each 1x 10/100/1000M Ethernet with RJ45 for data exchange Active Crystal Oscillator 1x Single-ended 33.333MHz provide PS Clock 1x LMK04828 for the PL Logic, DDR Reference, GTY Expansion Port J2, J11: 9-pin; J8: 15-pin; J13: 37-pin; Exposes RS422, RS485, CAN, JTAG, RS232 and IO MMCX ports 5x mmcx: CLK IN/OUT, EXT_CLK SD Card Slot 1 micro SD Card Slot, support SD Mode and SPI Mode Real Time Clock 1x Built-in RTC LEDs - Push-Buttons - Power Supply Voltage Input: +24 ~ +32 V DC, PCIE 6-pin (Molex 39-30-1060) Minimum Input Power: 60W What's Included FPGA Board 1 DC Fan (installed) 1 USB to Type-C cable 1 Power Adapter 1 set SMA Cable 1x Ethernet Cable 1x SD Card 1x 32GB SD Card Reader 1 Dimensions Dimension 200.00 mm x 200.00 mm PCB Independent GND and Power Layers Resources & Downloads AXW49 User Manual (PDF, Simplified Chinese) Full documentation including Schematics, Demo projects (if applicable) will be provided by CodeRobin.