Competitor Athletic Metal Locker — 4 Tier, 3 Wide
Description Model: ASI Four Tier Competitor Collection Powder Coated Metal Locker Type: Offers the ultimate in ventilation and visibility combined with strength and visual appeal Application: The ideal choice for athletic lockers and many other applications where maximum airflow is needed Colors: 15 designer colors are available, including 6 quickship colors: almond, black, gray, blue frost, charcoal, and white Finish: 2 mil powder coated in any of 15 designer colors Body Construction: 14 gauge diamond perforated doors and 18 gauge solid backs; all other components are 16 gauge Door: Rubber door silencers for quiet operation Hinges: Continuous full-length staked piano hinge for security Handle: Stainless steel recessed handle for safety Latch: Single-point latch is maintenance free with a built-in anti-pry feature Locks: Compatible with built-in lock options Legs: 6" H legs are included Plates: Polished aluminum number plate riveted to door face with black numerals ½” high. Default numbering sequence is #1 and up. If a special numbering sequence is required, please enter your desired sequence within the text box available at checkout. *Due to variances among color monitors the colors that appear on your screen may not be exact. If color is important you must request samples prior to ordering. Colors are subject to change without notice. Specifications GENERAL 1.01 - Work Included: A. The lockers shall be powder-coated steel as manufactured by ASI Storage Solutions, Eastanollee, GA 30538. B. Furnish all labor and materials for completion of work in this section as shown in the approved drawings and specifi ed herein PRODUCT 2.01 - Material: All major steel parts shall be of mild cold rolled commercial quality steel. 2.02 - Finish: All material shall be power washed and phosphate treated for maximum fi nish color adhesion. All components shall be fi nished with a 2 mm hybrid epoxy/ polyester powder, electrostatically applied to ensure uniform thickness and baked to cure. 2.03 - Construction: All lockers shall be built on a unit principle with common intermediate uprights separating units. 2.04 - Door Frames: Shall be 16 gauge formed in a channel shape. Vertical members shall have additional fl ange to provide a continuous door strike. Cross frame members shall also be 16 gauge channel shaped, including intermediate cross frames on double and triple tier lockers. 2.05 - Doors: Shall be 14 gauge, channel shaped on both the lock and hinge side with angle formations across the top and bottom. Single, double and triple tier locker doors shall have a 16 gauge full height reinforcement channel. 2.06 - Ventilation: All locker sides and doors 20” or higher shall be perforated with diamond-shaped openings ¾” wide x 1-1/2” high in a quantity and pattern to ensure maximum ventilation and maintain structural strength. All other doors shall have small diamond-shaped perforations 7/16” wide x 15/16” high. 2.07 - Body: Backs shall be 18 gauge; all other body parts shall be 16 gauge. Bolt spacing shall not exceed 9” o.c 2.08 - Hinges: Shall be full length 16 gauge continuous piano type riveted to both door and frame. 2.09 - Handles: Shall be one-piece 20 gauge deep drawn stainless steel cup designed to accommodate locks. 2.10 - Latching: All lockers shall have an 11 gauge frame hook secured to the frame. The frame hook shall have a padlock hasp protruding through the recessed handle. A rubber silencer shall be fi rmly secured to the frame at each latch hook. 2.11 - Interior Equipment: Single tier lockers 48” or higher shall have a shelf. If under 18” deep, locker shall have three wall hooks and one ceiling hook. Single tier lockers 18” deep or more shall have a coat rod instead of a ceiling hook. Double tier lockers shall have three wall hooks and one ceiling hook. Triple tier lockers shall have three wall hooks and one ceiling hook. Triple tier lockers shall have three wall hooks for 12” wide and 4 wall hooks for 15” and wider lockers 2.12 - Number Plates: Each locker shall have a polished aluminum number plate riveted to door face with black numerals ½” high. 2.13 - Color: Doors, Frames, and all body parts shall be fi nished in same color 2.14 Assembly - All locker components shall be assembled by use of rivets. EXECUTION 3.01 - Installation: Lockers shall be installed in accordance with ASI’s installation instructions and shall be level and plumb with fl ush surfaces and rigid attachment to anchoring surfaces. Downloads Assembly Instructions Care & Cleaning Specifications Technical Data Sheets Warranty
White, Almond, Gray, Blue Frost, Charcoal, Black