ZW Packaging Machinery Co., Ltd – VFFS PACKAGING LINE FOR FROZEN FRUIT – WL-V620

Packing line consisting of: 101 Z MODULAR BUCKET CONVEYOR 1 0,75 0,75 Model:FT-D1 Made of stainless steel – AISI304 Total height of the conveyor: 4.3 m, material exit height 3.8 m Technical data: * Freestanding construction with adjustable feet for leveling the machine * Heavy duty bucket guide chains * Buckets made of polymer for the food industry – FOOD GRADE * Bucket volume 1.5 L, dimensions (L*W*H) 420*134*65 mm * Conveyor capacity ~5m3 /h * Drive motor P=0.75kW, frequency regulation * Plexiglas on the back for visual control of operation * Large service openings with safety microswitches * Vibro feeder with a double vibrator at the entrance of the conveyor for continuous dosing of materials into buckets * Maximum vibration amplitude 4 mm Electric control cabinet mounted on the side of the elevator with: – Switch for selecting the operating mode – AUTO/MANUAL – Safety switch – START/STOP buttons – Frequency regulator for driving the main motor – Potentiometer for adjusting the vibration amplitude * Overload protection system for effective protection of engine, buckets and chains The price of the offer includes only those positions whose price is included in the total sum.VAT is not included in the price. Warranty period: 24 months from the day the equipment was put into operation or 30 months from the day the customer received the equipment, whichever is earlier. The terms of the guarantee are according to the General terms and conditions of the guarantee and engagement of the technical staff of Feed Tec. Payment is made in RSD according to the daily selling rate of Raiffeisen Bank for foreign currencies. (100) VFFS PACKAGING LINE FOR FROZEN FRUIT NO. DESCRIPTION QTY. POWER (kW) PRICE (EUR) 2 od 5 102 FIXED PLATFORM WITH STAIRS 1 Model: JW-D2 Made of stainless steel – AISI304 Technical data: * Dimensions approx. 2.5×2.5×2.2m * Modular design – connecting preformed elements using screws * Easy installation 103 “MULTIHEAD” WEIGHER FOR FROZEN PRODUCTS WITH 14 HEADS – 2G 1 1,50 1,50 Model: FT-A14-2G-1 With HBM (Germany) load cells and measuring device Made of stainless steel – AISI304 Technical data: * Modular design – replace the measuring cell without stopping the process * Increased efficiency and stability * The possibility of washing the device with a jet of water of moderate intensity * Max. capacity of individual scales: 10-1500g * Weighing accuracy: X(0.5) * Max. weighing speed: 120PPM * Bucket volume: 3L Ribbed baskets and panels suitable for frozen products * Control panel: 9.7″ Touch Screen * Measuring cell to control the material level in the upper bucket * Drive: Stepper motor * Protection level: IP65 * Power: 220V/1500W/50/60Hz/10A * Gross weight: 500kg 104 SYNCHRO HOPPER 1 Model: THP-6 Made of stainless steel – AISI304 Technical data: * Volume 6.7 liters * Necessary when reaching higher speeds. With this hopper, the time of falling of the raw material is reduced 3 od 5 105 VERTICAL AUTOMATIC PACKAGING MACHINE-ADVANCED CONFIGURATION 1 5,10 5,10 Model: FT-VP6240/H Made mainly of stainless steel – AISI304 Technical data: * Reinforced machine frame made of Al profile * Intelligent temperature controller that ensures precise and tight seal *PLC PANASONIC, servo system, pneumatic control system and associated Touch Screen panel enable precise control with great flexibility of operation The movable “Touch screen” control panel has the possibility of memorizing parameters for a large number of operating modes – it is not necessary to reset the machine when switching from one product to another * Advanced mechanism for stretching and unwinding the film * Film pulling mechanism: with servo-motor PANASONIC, with bevel gears instead of cardan joints, which increases the reliability and service life of the machine, with two toothed belts for pulling the Film on the bag former * Sealing jaw drive – servo motor PANASONIC or equivalent * Pneumatic elements -AIR TAC * Industrial thermal printer – date stamp, with ribbon * Capacity: 15-85 ppm. * Bag dimensions (mm): L*W (80~400)mm * (80~300)mm. * Type of bag: pillow (bags with a flat bottom – optional). Allowed film thickness 0.04mm~0.15mm. (bag with a flat bottom – optional) * Roll width: 180~620 mm. * Bag material: All laminated materials suitable for heat sealing (single-layer PE film – optional) * Including one bag former – as per Buyer’s specification. * Characteristics of the required compr. air: 0.6-0.8Mpa, 0.2m3/min * Electric power: 5.1kW, 220V, 50 (60)Hz * Dimensions: L*W*H=1640mm*1226mm*1709mm *Weight: 550kg 4 od 5 105-D1 ADDITIONAL CHARGE FOR VACUUM DEVICE FOR FILM PULLING – WITH TWO BELTS 1 105-D2 DEVICE FOR ACCEPTING HEAVY BAGS 1 Technical data: * For accepting heavier bags with packaged product * With pneumatic cylinder and automatic control 105-D3 ELECTRO-MECHANICAL SYSTEM FOR THE CORRECTION OF THE PATH OF THE FILM ON THE PACKAGING MACHINE 1 0,75 0,75 Technical data: * To correct the path of the film due to deviations in the geometry of the film used * With servo motor and automatic control 105-D5 ADDITIONAL BAG FORMER FOR FROZEN PRODUCTS 2 Made of stainless steel – AISI304 The former is double-walled, specially designed for frozen products, in order to ensure a good weld. 106 INCLINED BELT CONVEYOR OF THE FINAL PRODUCT 1 0,50 0,50 Model: FT-D3-400 For receiving and transporting the packaged product Made of stainless steel – AISI304 Technical data: * Tape width: 400mm * Transport height: 730mm-880mm 107 ROTATING TABLE 1 0,37 0,37 Model: FT-D4 For receiving the packaged product Made of stainless steel – AISI304 Technical data: * Table diameter: 1000mm * Height 700-800mm * Potentiometer for regulating the table rotation speed * Gear motor P=0.37 kW * Dimensions of the packaged device LxWxH: 1000x1000x780mm