Extreme 60W LED Bar by Digi-Lumen — Full Spectrum Propagation & Veg Light with 0-10V Control

The Digi-Lumen Extreme 60W Bar is a compact full-spectrum LED built for the early stages — cuttings, rooting, seedlings and veg — and for filling supplemental gaps in bigger setups. It pushes 180 µmol/s at 3.0 µmol/J from 192 single-mount 4000K diodes, with the driver built into a 600mm aluminium heat-sink body that weighs just 1.25kg. IP45 water resistance handles clone-dome humidity, and the 0–10V control means it dims and schedules from a controller like the rest of the Extreme range. This is a propagation and veg light, not a flowering main light — and at 60W it is priced and powered accordingly. 3.0 µmol/J at 60W The same category-leading efficacy as the big Extreme fixtures, scaled down — 180 µmol/s of usable light for a tiny power draw of 0.3A. 4000K Spectrum for Props & Veg Full-spectrum white with the blue weighting that cuttings, seedlings and vegetative growth respond to — tight nodes, strong roots. 0–10V Control, Driver Built In One plug and it runs — no external ballast. The 0–10V control lets a controller dim and schedule it alongside your main lights. Compact IP45 Build 600mm long, 1.25kg, aluminium heat-sink body rated IP45 — fits shelving units, clone stations and small tents, and shrugs off humidity. Specifications Model Extreme 60W Bar 3.0 Max PPF @ 60W 180 µmol/s PPF Efficacy 3.0 µmol/J Light Source 192 x 4000K single-mount LEDs Beam Angle 120 degrees Control 0–10V Driver Built-in Power Draw 60W max / 0.3A Input Voltage 220–240V AC, 50–60Hz Body Aluminium heat sink, IP45 Dimensions / Weight 600mm x 56mm x 60mm / 1.25kg Operating Temp -25°C to 40°C Lifespan 50,000+ hours Warranty 2 years Mounting Stand sold separately Getting the most from your Extreme 60W Bar Perfect over a clone dome or seedling tray on a shelving rack — the slim 600mm body fits where a full fixture will not. Keep it as a propagation, veg and supplemental light. For flowering a full canopy, step up to the Extreme 400W or larger. The IP45 body handles the humidity around domes and misting, but it is not waterproof — keep it out of direct spray. Running several bars over a rack? The 0–10V control lets a single controller dim and schedule the lot together. Setting Up 1 Mount the bar above your tray, dome or shelf — the optional stand suits bench and rack setups. 2 Plug in — the driver is built in, so there is nothing else to wire for standalone use. 3 Optionally connect the 0–10V control to a lighting controller for dimming and schedules. 4 Start higher above cuttings and fresh seedlings, lowering the bar as roots establish and growth hardens off. 5 Move plants under a main fixture once they outgrow the propagation stage — the bar then earns its keep as supplemental light. Pairs Well With Enviro-Pro Environmental Controller Run the bar's 0–10V control from the Enviro-Pro alongside your main lights — one touchscreen for dimming, schedules and the whole environment. Propagation Gear Domes, trays, plugs and heat mats — everything the 60W Bar shines on. Build the full cloning station around it. The Digi-Lumen Range When plants outgrow the prop bench, the Extreme range scales all the way to the 1000W XL — same ecosystem, same 0–10V control. FAQ What is the Extreme 60W Bar best used for? Cuttings, rooting, seedlings and early vegetative growth — clone stations, shelving racks and small tents — plus supplemental fill light in larger setups. Can it flower a plant on its own? No. At 180 µmol/s it is a propagation, veg and supplemental light — flowering a full canopy needs far more intensity. Step up to the Extreme 400W or larger for a main flowering fixture. Does it need an external driver? No. The driver is built into the bar — plug it into a standard Australian outlet and it runs, drawing just 0.3A. Can I dim it or run it from a controller? Yes. The bar has 0–10V control, so a compatible controller can dim and schedule it — handy when running several bars over a rack. Is a mounting stand included? No — the stand is sold separately. The bar itself is 600mm long and 1.25kg, so it mounts easily to shelving and rack setups. Strong Starts for Clones and Seedlings 180 µmol/s at 3.0 µmol/J from a 600mm bar with 0–10V control. Free shipping over $499*. Add to Cart View the Digi-Lumen Range