UltimaPeak Magfeets

Stabilize your stove and stop canister rattle with just 3.8 grams. THREE PROBLEMS. ONE MINIMAL SOLUTION. A stable cooking base. A canister that packs without rattling. A small separation that keeps metal surfaces apart during storage. MagFeets solves all three with a magnetic set weighing just 3.8 g. Features A STABLE BASE Three evenly spaced magnetic feet create a wider, more stable contact point for your gas canister on suitable, level ground. BUILT TO NEST MagFeets helps center the canister inside compatible 95 mm cooking pots, reducing movement and rattling inside your cook kit. OFF THE POT BOTTOM The feet lift the canister away from the pot bottom during storage, reducing direct metal-to-metal contact and helping moisture escape. SNAP ON. STAY CENTERED. Attach one MagFeet to the rolled bottom rim of the gas canister, then position the remaining two evenly around the base. The notched side of each MagFeet should align with the canister’s lower ring, as shown in the image. Press each foot gently into place and check that all three are fully seated before setting up your stove. Correct orientation provides the intended support and avoids unnecessary stress on the part. Always use your stove and gas canister on firm, level ground and follow the manufacturer’s safety instructions. MagFeets is designed, tested and manufactured in Sweden using carbon-fibre-reinforced PETG. Every angle and contact point has been developed around a specific purpose: creating useful stability and smarter storage with the smallest possible amount of material. Each set is produced and inspected by UltimaPeak before it leaves our workshop. Built in Sweden. MAGFEETS REGULAR OR MAGFEETS LARGE? Both versions fit common small and large threaded gas canisters. The difference is the footprint: original MagFeets keeps weight and packed size to a minimum, while MagFeets Large provides a wider stance for larger cooking setups. REGULAR WEIGHT 3.8 g per set FOOTPRINT Compact BEST FOR 95 mm cook systems and minimal setups CANISTER COMPATIBILITY Common small and large threaded gas canisters LARGE WEIGHT 4.8 g per set FOOTPRINT Wider BEST FOR Larger pots and a broader cooking stance CANISTER COMPATIBILITY Common small and large threaded gas canisters Specs Regular Weight 3.8 g / 0.13 oz Dimensions 47 × 20 × 3 mm per foot Material Carbon-fibre-reinforced PETG Large Weight 4.7 g / 0.17 oz Dimensions 55 × 20 × 3 mm per foot Material Carbon-fibre-reinforced PETG FAQ Which gas canisters are compatible with MagFeets? MagFeets is designed for common threaded backpacking gas canisters with a rolled bottom rim. It fits both the smaller and larger canister sizes commonly used with lightweight screw-on camping stoves. Because rim profiles can vary between manufacturers, check that all three feet seat securely before use. What is the difference between MagFeets Regular and MagFeets Large? Both versions fit common small and large threaded gas canisters. Original MagFeets (Regular) weighs 3.8 g per set and has the most compact footprint, making it ideal for minimal cook systems and nesting inside compatible 95 mm pots. MagFeets Large weighs 4.7 g per set and creates a wider stance, making it better suited to larger pots or users who prioritize additional stability over the smallest possible packed size. How should MagFeets be attached? Attach the three feet evenly around the rolled bottom rim of the gas canister. The notched side of each MagFeet should align with the canister’s lower ring. Press each foot gently into place and check that all three are fully seated before using your stove. Can MagFeets stay attached while cooking? Yes. MagFeets is designed to remain attached while the stove is in use. Always place the canister on firm, level and non-combustible ground, keep it away from direct flame and follow the safety instructions supplied with your stove and gas canister. Does MagFeets fit inside a 95mm cooking pot? Original MagFeets (Regular) is designed to help center a compatible gas canister inside many 95 mm cooking pots, reducing movement and rattling during transport. Exact fit depends on the pot, canister and other items stored inside your cook kit, so compare your setup before relying on a specific nesting configuration. How should I clean and store MagFeets? Wipe MagFeets clean with lukewarm water, mild soap and a soft cloth. Allow the feet and gas canister to dry completely before storing them inside your cooking pot. Do not expose MagFeets to direct flame, excessive heat or harsh solvents.