inDESIGN 2 Channel Power Amp 2 x 800W @ 8 2 x 1200w @ 4, Class H, 2RU

2x 800W 2-Channel Power Amplifier, 2RU The inDESIGN iD-HC power amplifier series is a high powered efficient 2 Stage, Class H amplifier design-built for demanding mobile live sound and permanent installation amplification applications. Each model features min. 4 ohms load, bridging @ 8 ohms, switchable input sensitivity, soft start, DC protection, short circuit protection, clip limiter and thermal overload protection. Maintenance is a breeze with removal – washable front filters via the front panel. The weight is due to large transformers – sorry about that... at least your amps will have a long service life! Specifications Number of Channels: 2 Power RMS Watts 8Ω Stereo: 800W Power RMS Watts 4Ω Stereo: 1200W Power RMS Watts 8Ω Bridged: 2400W Amplifier Topology Category: 2 STAGE, CLASS H Frequency Response: 20Hz - 20kHz THD: 0.05% S/N Rate: >108dB Slew Rate: >20V/μs Damping Factor: 300 (100Hz) Input Connections: 2x XLR3F PIN2 = HOT (+) PIN3 = COLD (-) PIN3 = GROUND Signal Link Connection: 2x XLR3M PIN2 = HOT (+) PIN3 = COLD (-) PIN3 = GROUND Input Impedance (unbal/bal): 10kΩ / 20kΩ Input Sensitivity VAC: 0.77V / 1V / 1.44V Output Connections & Wiring: SPEAKON NL4 x2 CH1 +1/-1 STEREO MODE CH2 +1/-1 STEREO MODE CH1 +1/-1 INPUT LINK MODE CH2 +1/-1 INPUT LINK MODE CH1 +1/+2 BRIDGE MODE CH2 NOT CONNECTED IN BRIDGE MODE Voltage Gain: 38dB Cooling Flow: Front to Rear (via dual thermo controlled fans) Protection: Soft Start, DC Protection, Short Circuit, Clip Limiter, Thermal Overload Mains Power Requirements: 230V/50Hz +/- 10% Mains Power Connection: 10 AMP PLUG / attached cable Power Consumption RMS @ Stereo 4Ω: AH/Watts @ Idle: 0.15A / 24.5W AH/Watts @ 1/8th Power: 2.0A / 460W AH/Watts @ 1/3rd Power: 5.3A / 1219W AH/Watts @ Full Power: 9.7A / 2231W Product Dimensions (2RU) WxDxH : 483 x 456 x 88 mm Product Weight: 21.6kg Carton Dimensions WxDxH: 570 x 560 x 145 mm Gross Weight: 24kg