RTB24-100 Rohde & Schwarz Digital Oscilloscope New

Features: Analog channels: 4 Digital channels: Up to 16 with R&S RTB2-B1 mixed signal option Bandwidth: 100 MHz Sample rate: up to 2.5 Gsample/s Memory depth: up to 20 Msample ADC resolution: 10 bit Display: 10.1" capacitive touchscreen Power of ten for every task, everyday R&S RTB 2 series oscilloscopes combine the power of ten with smart operating concepts to make them a perfect general-purpose tool for students, hobbyists, technicians and engineers. The R&S RTB 2 series is the follow up to the high-performance R&S RTB2000 oscilloscope. Try one in the lab and see the difference. Power of ten: 10-bit ADC 10 Mpoints memory 10.1" capacitive touchscreen 10 s boot time 10-in-1 instruments Signal analysis: quick results See small signal details in the presence of large signals The R&S RTB 2 features a customized Rohde & Schwarz engineered 10-bit A/D converter that delivers a fourfold improvement compared to conventional 8-bit A/D converters. The increased resolution results in sharper waveforms with more signal details that would otherwise be missed. One example is the characterization of switched-mode power supplies. The voltage across the switching device must be determined during the on/off times within the same acquisition. Capture more time at full bandwidth 10 Msample standard and 20 Msample interleaved The R&S RTB 2 offers a class-leading memory depth: 10 Msample per channel are available, even 20 Msample in interleaved mode. This is 10 times more than similar oscilloscopes in the same instrument class. The user captures longer acquisition sequences even at high sampling rates, e.g. when analyzing transients of switched-mode power supplies, and thus benefits from more detailed analysis results. Logic analysis with the MSO option 16 additional digital channels Every R&S RTB 2 is MSO ready, which allows the R&S RTB2-B1 option to enable up to 16 additional digital channels. The oscilloscope captures and analyzes signals from analog and digital components of an embedded design – synchronously and time-correlated to each other. For example, the delay between A/D converter input and output can conveniently be determined with the cursor measurements. Waveform and pattern generator Generate analog and digital stimuli The R&S RTB-B6 waveform and pattern generator up to 50 Mbit/s is useful for educational purposes and for implementing prototype hardware. Apart from the common sine, square/pulse, ramp and noise waveforms, it outputs arbitrary waveforms and 4-bit signal patterns. Waveforms and patterns can be imported as CSV files or copied from oscilloscope waveforms. Predefined patterns including. I2C, SPI, UART and CAN/LIN can be used. Digital voltmeter Measure and display electrical potential The R&S RTB 2 features a 3-digit voltmeter (DVM) and 6-digit frequency counter on each channel for simultaneous measurements. Standard measurement functions include DC, AC+DC (RMS) and AC (RMS). Frequency analysis mode Difficult-to-find faults often result from the interaction between time and frequency signals. The FFT function of the R&S RTB 2 is activated at the push of a button and by simply entering the center frequency and span. Thanks to the R&S RTB 2 oscilloscopes’ high-performance FFT functionality, signals can be analyzed with up to 128 kpoints. Other practical tools include cursor measurements and autoset in frequency domain. Mask test mode Mask tests quickly reveal whether a specific signal lies within defined tolerance limits. By using statistical pass/fail evaluation, they assess quality and stability of a DUT. Signal anomalies and unexpected results are quickly identified. When the mask is violated, the measurement stops. Each violation can generate a pulse output at the AUX-OUT connector on the R&S RTB 2. This pulse output can be used to trigger actions in the measurement setup. Ready for the teaching lab In the teaching lab, the R&S RTB 2 oscilloscope is the perfect choice to teach students how to measure with an oscilloscope. It has an easy-to-use concept combined with state-of-the-art technology at an affordable price. The large 10.1" high-resolution screen shows every signal detail, and one instrument can be shared among several students. Reports can be efficiently created with the handy, flexible screen annotation tool.