Lutron RadioRA 3 In-Line Relay Module

The Lutron RadioRA 3 In-Line Relay Module switches non-dimmable lighting and small motor loads in-line, behind a ceiling rose, in a void or in a junction box. The module joins the RadioRA 3 system over Lutron's Clear Connect RF, so circuits can be controlled from any Vierti keypad, a Pico remote, the Lutron app, or a programmed scene. How it works General-purpose wireless switch for the Lutron RadioRA 3 system. Rated for 6 AX of general-purpose lighting (all types). Rated for 2 A / 0.5 HP for motor loads. Neutral required. Lutron Clear Connect Type A wireless at 868 MHz. Works independently of Wi-Fi. Range: within 9 m of a RadioRA 3 processor or wireless repeater. Up to four repeaters can be added per RF link. Remote device association lets the module be added to a system without physically accessing it after installation. Typical uses Switching non-dimmable LED, fluorescent or incandescent circuits Driving exhaust fans, transformers and small AC motors up to 0.5 HP Adding wireless control to circuits where the wall switch position cannot be replaced Smart control of outdoor lighting, garden circuits or feature lighting without rewiring Specifications Model: RR3K-R6ANS-240 Voltage: 220 to 240 V, 50 / 60 Hz Dimensions: 153 x 46 x 32 mm Wiring: 0.5 to 2.5 mm² conductors, outside diameter 5.2 to 8.5 mm, all wires same diameter Typical power consumption: less than 0.5 W Operating environment: 0 to 40 °C, 0 to 90% humidity non-condensing, indoor use only Mounting clearance: 120 mm from insulation, heat sources and metal surfaces. Not for installation inside metal enclosures or behind metal ceilings. Approvals: CE, UKCA, RoHS, ISO 9001:2015 Professional installation across Ireland Designed, supplied, programmed and commissioned by Formwave, Lutron specialist installers based in Dublin and serving residential clients across Ireland.