Motorcycle bottle holder for Ø 25 mm engine guard and top case, adjustable from 58 to 78 mm

The LOBOO CSHJ-1 motorcycle bottle holder keeps your water bottle, bottle, can, or thermos within reach while you travel: attach it to a 25 mm tubular crash bar with two clamps, or to the wall of a top case or side case with through-bolts. The elastic cord with three attachment positions secures containers measuring 58 to 78 mm in diameter, while the non-slip silicone inserts hold them in place without marking them. It weighs 191 g. What you can put in it Sports water bottles and water bottles Cans Thermoses and insulated cups A portable fire extinguisher It’s the diameter that matters, not the capacity: the container must measure between 58 and 78 mm. LOBOO does not specify a maximum carrying weight. How it works Elastic cord with handle: unhook the handle from the buckle at the bottom, open the holder, insert the container, then hold it from underneath and pull the handle up until the cord is taut. Three preset positions for attaching the handle, depending on the container’s diameter. Non-slip silicone inside: LOBOO says it keeps the container stable, preventing movement and damage. Folds away when empty: close the holder, tighten the cord, and hook the handle into the buckle at the bottom. When closed, it measures 179 × 57,9 × 38,4 mm. Where to mount it Crash bar or frame with a Ø 25 mm tube: two clamps and four M5×10 screws tightened to 5 N·m, with no drilling required. It can be mounted vertically or horizontally: the mounting angle changes by 90°. Top case or side cases: adhesive drilling template, supplied Ø 5,5 mm drill bit, O-rings on the back, and screws tightened from the inside. Requires drilling the case, and LOBOO warns that installation may damage it. The clamp is designed only for 25 mm tubes: measure your crash bar’s diameter before buying. In the box Bottle holder, 2 clamps, 8 M5×10 screws (4 for the clamps, 4 for the top case), 4 M5 washers, 4 Ø 10 × 1,5 mm O-rings, adhesive drilling template, Ø 5,5 mm twist drill bit, 3 and 4 mm hex keys, threadlocker, and installation manual. You can also attach the Wanderer inflatable bags to the same 25 mm crash bars. To complete your gear for long trips, explore the LOBOO Ergonomics and Comfort range.