Merican - M6N Red Light Therapy Bed

Merican M6N Advanced Full-Body Red Light Therapy Bed with 41,600 EPISTAR® LEDs, 5-Wavelength Independent Control, and Full-Cabin Design The Merican M6N is a full-cabin red light therapy bed an enclosed lying-down format that surrounds the user on all sides within a streamlined tunnel structure, delivering uniform full-body light coverage from above and below simultaneously. The full-cabin design is the M6N's most significant architectural distinction from open-top clamshell beds: the user lies within a closed enclosure rather than between two open surfaces, which produces a more immersive treatment environment and eliminates the peripheral light loss that occurs at the edges of open-format systems. The result is consistent irradiance delivery across the complete body surface 100 to 120 mW/cm² at user level the highest user-level irradiance of any lying-down bed in the Merican range. 41,600 EPISTAR® LEDs Merican Optical Energy Research Center technology The M6N's light system is built around 41,600 EPISTAR® diodes developed in conjunction with next-generation LED composite light source technology from the Merican Optical Energy Research Center. Precision optical filtering is integrated into the panel design to maintain wavelength stability and consistent energy output across the full treatment surface across the operational life of the unit. The 18,720-LED active array delivers 129 mW/cm² at LED level, translating to 100 to 120 mW/cm² at user level a significantly higher user-level figure than open-top bed formats achieve with comparable LED-level output, because the enclosed cabin geometry minimises peripheral light dispersion. EPISTAR® diodes are rated to 100,000 hours; at multiple sessions daily in a commercial environment, the array maintains its calibrated output for years without diode replacement. Five independent wavelengths with intelligent temperature monitoring and overheat protection The M6N operates across five wavelengths red at 633nm and 660nm, and near-infrared at 810nm, 850nm, and 940nm each independently controllable through the touchscreen interface. The combination of five independently selectable channels and both continuous wave and pulsed delivery modes gives operators broad protocol flexibility from a single unit. The enclosed cabin format makes thermal management more critical than in open systems, and the M6N addresses this directly: built-in temperature sensing technology continuously monitors internal conditions and automatically regulates temperature throughout each session. A separate automatic overheat protection system monitors operating temperatures independently, activates cooling functions, and triggers audible alerts if temperature limits are exceeded ensuring client safety and system integrity under continuous commercial use. Side body fans, mobility wheels, customisable front panel, and Bluetooth surround audio The M6N includes side body fans as an active airflow component alongside the temperature monitoring system managing the thermal environment at the client surface rather than only at the system level. Integrated mobility wheels allow the unit to be repositioned within a facility despite its 380 kg net weight, providing operational flexibility for facilities that reconfigure treatment room layouts or share space across use cases. A customisable front panel is available for rebranding allowing the M6N to be presented under a facility's own brand identity rather than the Merican name, a feature specific to this model within the range. The built-in Bluetooth surround sound speaker system allows clients to stream audio from their own devices during sessions, enhancing the immersive quality of the enclosed cabin environment. 6,500W at 220V or 380V, touchscreen plus T-Max control, FDA and CE certified At 6,500W the M6N requires a dedicated circuit with breaker and RCD/GFCI protection, available at either 220V or 380V depending on local facility infrastructure. The control architecture follows the broader Merican commercial standard: integrated touchscreen for in-unit session management, wireless tablet support for remote operation, and T-Max integration for multi-unit facility management. Merican holds FDA registration, ISO 9001, ISO 13485, CE, and RoHS compliance certifications a set of internationally recognised quality and safety standards that are relevant to any clinical or medical aesthetics environment where regulatory compliance is a purchasing consideration. The M6N is covered by a 5-year warranty on the main unit structure and core components, and a 1-year warranty on acrylic components. An advanced full-cabin red light therapy bed with enclosed tunnel design for immersive full-body coverage. Dimensions: 89.57" L × 48.62" W × 44.29" H tunnel height 16.54". Net weight: 380 kg (838 lbs). 41,600 EPISTAR® LEDs (18,720 active), 100,000-hour lifespan. Wavelengths: red 633nm and 660nm, NIR 810nm, 850nm, and 940nm independent control per channel. Irradiance: 129 mW/cm² (LED level), 100–120 mW/cm² (user level). Continuous wave and pulsed modes. Recommended session: 10–12 minutes. Intelligent temperature monitoring + automatic overheat protection. Side body fans. Mobility wheels. Customisable front panel for rebranding. Touchscreen + wireless tablet + T-Max control. Built-in Bluetooth surround speakers. 6,500W 220V or 380V dedicated circuit with breaker and RCD/GFCI. Ships fully assembled (side fan detached). White or Black. 5-year unit warranty / 1-year acrylic warranty. FDA registered, ISO 9001, ISO 13485, CE, RoHS. Manufactured by Merican, est. 2008 trusted in 100+ countries. Full-cabin enclosed tunnel design 41,600 EPISTAR® LEDs 100,000-hour LED lifespan 5 wavelengths - independent control Red: 633nm + 660nm NIR: 810nm + 850nm + 940nm 129 mW/cm² irradiance (LED level) 100–120 mW/cm² irradiance (user level) Continuous wave + pulsed modes Intelligent temperature monitoring Automatic overheat protection Side body fans Mobility wheels Customisable front panel rebranding Touchscreen + wireless tablet + T-Max Built-in Bluetooth surround speakers 6,500W - 220V or 380V 10–12 min recommended session 380 kg ships fully assembled (side fan detached) White or Black 5-year unit warranty FDA registered - ISO 9001 - CE - RoHS PEMF add-on available Merican - est. 2008 - 100+ countries Specifications Dimensions and weight Length 89.57 in (2,275 mm) Width 48.62 in (1,235 mm) Height 44.29 in (1,125 mm) Tunnel height (interior) 16.54 in (420 mm) Net weight 380 kg (838 lbs) Gross weight (packaged) 450 kg (992 lbs) Available colours White / Black Light system LED type EPISTAR® high-performance diodes Total LEDs 41,600 Active LED array 18,720 LEDs LED lifespan 100,000 hours Red wavelengths 633nm, 660nm Near-infrared wavelengths 810nm, 850nm, 940nm Wavelength control Independent per wavelength channel Irradiance (LED level) 129 mW/cm² Irradiance (user level) 100–120 mW/cm² Treatment modes Continuous wave and pulsed Recommended session 10–12 minutes Electrical and control Power 6,500W Voltage 220V or 380V Power connection Dedicated circuit with breaker and RCD/GFCI Control system Integrated touchscreen panel Remote control Wireless tablet compatible Multi-unit management T-Max integration supported Audio Built-in Bluetooth surround speakers Features and safety Temperature monitoring Intelligent built-in sensor system Overheat protection Automatic activates cooling + audible alert if limit exceeded Cooling Side body fans Mobility Integrated wheels Front panel Customisable for facility rebranding Packing Fully assembled (side fan detached) Intended use Commercial wellness, aesthetic, clinical, and medical wellness Certifications and warranty Certifications FDA registered, ISO 9001, ISO 13485, CE, FCC, RoHS, UKCA, IEC62471, EMC, LVD Main unit warranty 5 years Acrylic components warranty 1 year Manufacturer Merican est. 2008 Markets served 100+ countries Merican M6N Unit Overview and Dimensions What's included Merican M6N Red Light Therapy Bed (fully assembled, side fan detached) 41,600 EPISTAR® LED array pre-installed in panels 5-wavelength light system (633, 660, 810, 850, 940nm) Independent wavelength control system Integrated touchscreen control panel Wireless tablet compatibility (tablet not included) T-Max integration support Built-in Bluetooth surround speaker system Intelligent temperature monitoring system Automatic overheat protection system Side body fans Integrated mobility wheels Customisable front panel (rebranding-ready) Assembly hardware and installation documentation Why the Merican M6N stands out Full-cabin tunnel design 100-120 mW/cm² user level The enclosed cabin geometry eliminates the peripheral light dispersion of open-top beds, delivering 100 to 120 mW/cm² at user level the highest user-level irradiance of any lying-down model in the Merican rang from the same 129 mW/cm² LED-level output shared across the lineup. Merican Optical Energy Research Center LEDs 41,600 EPISTAR® diodes developed with next-generation composite light source technology and precision optical filtering maintain wavelength stability and consistent energy output across the full treatment surface over the unit's operational life. Intelligent temperature monitoring + overheat protection Two independent thermal management systems continuous built-in temperature sensing and a separate automatic overheat protection circuit work together to maintain a safe and comfortable internal environment under continuous commercial daily use in the enclosed cabin format. Customisable front panel facility rebranding The M6N's front panel is customisable for facility branding allowing the unit to be presented under a clinic, spa, or studio's own brand identity. This feature is unique to the M6N within the Merican commercial range and is specifically relevant for medical aesthetics and premium wellness environments. Side body fans + mobility wheels Side body fans actively manage airflow at the client surface alongside the temperature monitoring system. Integrated mobility wheels allow a 380 kg unit to be repositioned within a facility without full disassembly operational flexibility that permanent-installation units of this size rarely provide. FDA registered ISO 9001, 13485, CE, RoHS + more Merican holds FDA registration alongside ISO 9001, ISO 13485, CE, FCC, RoHS, UKCA, IEC62471, EMC, and LVD certifications a comprehensive set of internationally recognised quality and safety standards directly relevant to clinical, medical aesthetics, and healthcare wellness environments. Certifications & Compliance The Merican M6N carries a full suite of internationally recognised quality, safety, and compliance certifications covering medical device standards, electromagnetic compatibility, optical safety, and environmental regulations. Click any certificate below to view official documentation. FDA Registered Facility ISO 13485 Certified ISO 9001 Certified CE Certified FCC Compliant RoHS Compliant UKCA Certified IEC62471 EMC LVD Certs & Compliance Optional Add-Ons PEMF (Pulsed Electromagnetic Field) Module +$700 USD Available exclusively on the M6N as an optional upgrade, the PEMF module adds pulsed electromagnetic field therapy to your sessions fully integrated into the bed's control system for simultaneous red light and PEMF delivery. Field Intensity 200 µT Waveform Square wave Frequency Range 1–50 Hz (adjustable) Duty Cycle 1%–50% (adjustable) Frequency Control Independently controllable Duty Control Independently controllable To add the PEMF module to your order, select it at checkout or contact us before placing your order. PEMF is available exclusively with the M6N flagship bed and is not available on other models in the Merican range. Shipping & Delivery Unit Price $14,000 USD Shipping Cost ~$2,500 USD DDP sea freight to the US (duty, delivery, and port fees included) Stock Status Usually in stock Ready to ship in 7–10 business days from order confirmation Transit Time Approx. 40–50 days Sea freight DDP to US destinations door-to-door delivery Shipping Method DDP Sea Freight Delivered Duty Paid all import duties, customs clearance, and delivery to your facility included Delivery Condition Fully assembled (side fan detached) Minimal on-site setup required reattach side fan and connect power Shipping cost is approximate and may vary based on delivery address and any additional access requirements. Contact us before ordering to confirm your exact shipping quote. For international orders outside the US, please enquire directly for freight options, duties, and estimated transit times. About Merican FDA Registered - ISO 9001 - ISO 13485 - CE - RoHS - UKCA - FCC - IEC62471 Professional-grade light therapy with internationally recognised certifications. Founded in 2008, Merican is a global manufacturer of professional red light therapy and wellness equipment, with products in use across more than 100 countries in wellness centres, fitness facilities, recovery studios, spas, and medical aesthetics practices. The M6N represents the most advanced bed-format system in the Merican commercial range combining the enclosed full-cabin design with next-generation optical filtering technology, the highest user-level irradiance of any lying-down model, dual thermal management systems, and a customisable front panel for facility rebranding. It is the model within the range most directly suited to clinical and medical aesthetics environments where certification, irradiance performance, and brand integration all matter. 41,600 EPISTAR® LEDs 100–120 mW/cm² user-level irradiance, 100,000-hour lifespan Five independent wavelengths red 633 + 660nm, NIR 810 + 850 + 940nm Full-cabin enclosed tunnel maximum irradiance efficiency, immersive environment Dual thermal management temperature monitoring + automatic overheat protection Customisable front panel facility rebranding capability Optional PEMF module 200 µT, square wave, 1–50 Hz, independently controllable 5-year main unit warranty FDA registered, ISO 9001, ISO 13485, CE, RoHS, UKCA, FCC Commercial Installation and Operation Built for clinical and high-performance wellness environments. The M6N requires a dedicated circuit with breaker and RCD/GFCI protection at 6,500W, available at 220V or 380V depending on local facility infrastructure. At 380 kg net weight and 450 kg packaged, delivery and placement requires appropriate material handling the unit ships fully assembled (with side fan detached for transport) and is a permanent facility installation once sited, with mobility wheels providing repositioning flexibility within a room rather than between sites. The full control architecture integrated touchscreen, wireless tablet support, and T-Max multi-unit management supports both single-unit and multi-unit facility configurations. The automatic overheat protection system operates independently of the temperature monitoring system, providing a redundant safety layer specifically designed for the enclosed cabin environment where heat management is more critical than in open-format beds. The customisable front panel is configured prior to or following delivery in consultation with the facility contact us for rebranding options and specifications before placing your order. Warranty 5-year main unit warranty / 1-year acrylic warranty The Merican M6N Red Light Therapy Bed is covered by a 5-year warranty on the main unit structure and core components, and a 1-year warranty on acrylic components and wearable parts, covering defects in materials and workmanship under normal commercial use. Technical support is available for troubleshooting and operational guidance, and replacement parts are provided for eligible warranty claims according to manufacturer guidelines. Warranty coverage does not include damage resulting from misuse, unauthorised modifications, improper installation, accidents, or normal wear and tear. To maintain coverage, the unit must be installed, operated, and maintained in accordance with the manufacturer's instructions. Retain your proof of purchase and product serial number for all warranty claims and support requests. We are an authorised Merican dealer.