*Note: Spacers and shims are included with all cranksets and spindles! Ahhh… the humble spindle spacer. 3D printed in-house out of polycarbonate for high strength, low weight and outdoor durability. Spacers and shims have an inside diameter to fit 30mm spindles. Spacers and shims are designed to match the aesthetic and functional features of the 2XR Crankset, but can be used on any other 30mm diameter crank spindle. REPLACEMENT 2XR SPINDLE SPACERS Lost your spindle spacers? We believe in the right to repair. Every 2XR Spindle comes with the required spacers, but if you need replacements… this is the right place. These spacer packs come with replacement spacers and shims for each of the 2XR Spindles. GENERAL PURPOSE SPACER + SHIM PACK The General Purpose Spacer and Shim Pack comes with 6, 2.5mm spacers and 6, 0.5mm shims, perfect for rare bottom bracket widths or if you’ve got to get creative for some reason. BROMPTON SPACER KIT Brompton folding bikes use a slightly offset bottom bracket. The Brompton Spacer Kit centers the 2XR Road spindle to accommodate Brompton’s design. Purchase this Brompton Spacer Kit in addition to the 2XR Crankset. CANNONDALE BB30A SPACER KIT For Cannondale “AI” asymmetric frames with BB30A bottom brackets. Key stipulations are: • BB30A, 73mm asymmetric BB • BB bearings are internal to bottom bracket shell • Must be used in conjunction with 2XR ROAD spindle Non-Drive Side: 2, 6.5mm spacers Drive Side: 1, 10.5mm spacer. Includes 6, 1mm shims (only use as needed). Buy these in addition to the 2XR Crankset. CANNONDALE BB30A … 83MM SPACER KIT For Cannondale “AI” asymmetric frames with BB30A – 83mm wide bottom brackets. Key stipulations are: • BB30A, 83mm wide asymmetric BB • BB bearings are internal to bottom bracket shell • Must be used in conjunction with 2XR ROAD spindle • (add 2, 2.5mm spacer set for use with ADVENTURE spindle in addition to BB30A-83 spacers) Includes (1) 6.5mm (drive side), (2) 1mm shims (non-drive side) spacers and (6) 1mm shims. Buy these in addition to the 2XR Crankset. ROAD BIKE: 68MM WIDE BB SPACERS Use this if you’ve got a 68mm bottom bracket shell with internal bearings and need spacers to fill the gap. • Frame must have 68mm wide outer bearing width • BB bearings are internal to bottom bracket shell • Must be used in conjunction with 2XR ROAD spindle only Includes (2) 10.5mm and (6) 1mm shims. Use these spacers in addition to the Road Spindle Spacer that came with your 2XR Crankset. 2, 2.5MM SPACERS Use this when using the Mountain spindle with a 68/86mm wide bottom bracket shell. Includes (2) 2.5mm spacers. Use 1 spacer on each side in addition to the Mountain Spindle Spacers that came with your 2XR Crankset.
2XR Road Spindle Replacement, 2XR Adventure Spindle Replacement, 2XR Mountain Spindle Replacement, 2XR DH/Mid Fat Spindle Replacement, 2XR Fat Spindle Replacement, General Purpose Spacer and Shim Kit, Brompton Spacer Kit, Cannondale BB30A, Cannondale BB30A 83mm, Narrow 68mm BB, 68 to 73mm BB