Allen-Bradley 2711P-T12W21D8S PanelView Plus 7 Operator Interface Terminal

Allen-Bradley 2711P-T12W21D8S PanelView Plus 7 Operator Interface Terminal Configured for operator visualization and touch-based command entry in PanelView Plus 7 systems, the Allen-Bradley 2711P-T12W21D8S (2711P-T12W21D8S Operator Interface Terminal) provides direct graphical interaction through a 12.1-inch WXGA TFT display. Hardware Specifications Parameter Specification Model 2711P-T12W21D8S Brand Allen-Bradley Product Family PanelView Plus 7 Product Type Operator Interface Terminal Display Size 12.1 inches Display Type WXGA TFT Graphics Color graphics Aspect Ratio 16:10 Pixel Resolution 1280 x 800 pixels Input Voltage Type DC voltage Ethernet Port Single Ethernet port RAM Capacity 512 MB Non-Volatile Memory Capacity 512 MB Free User Memory About 80 MB Weight 2.15 lb Operating Temp 0 to 55 deg C UPC 887172715433 PanelView Plus 7 Hardware Characteristics The 2711P-T12W21D8S uses a 12.1-inch TFT display with 1280 x 800 pixel native resolution and color graphics. The 16:10 aspect ratio corresponds directly with the specified WXGA display format for graphical operator interface applications. A single Ethernet port provides the physical network connection for external industrial communication and system integration. The terminal contains 512 MB RAM and 512 MB non-volatile memory for application and runtime data. Approximately 80 MB of free user memory remains available according to the supplied technical data. The supplied information does not define Ethernet protocol support, connector type, firmware revision, or network redundancy characteristics. Frequently Asked Questions Q: What display hardware is specified for the 2711P-T12W21D8S? A: The terminal has a 12.1-inch WXGA TFT color display with 1280 x 800 pixel resolution. Q: How many Ethernet ports does this terminal provide? A: The supplied specifications identify one Ethernet port for external industrial network connectivity. Q: Is the power consumption specified for this exact model? A: No. The supplied data identifies DC voltage input but does not state a power consumption value. Field Installation Guidelines Mount the terminal using the manufacturer-specified panel cutout and mechanical fastening arrangement for the PanelView Plus 7 enclosure. Verify the actual enclosure dimensions and mounting clearance against the applicable Allen-Bradley installation documentation before fabrication. Connect the specified DC supply using wiring sized for the actual installed load and applicable electrical standards. Route DC power wiring separately from high-energy switching conductors, motor cables, and high-current AC circuits. Use appropriate cable shielding practices when shielded communication wiring is installed in electrically noisy environments. Terminate cable shields according to the control system grounding design rather than creating unintended ground-current paths. Provide protective bonding for the enclosure or mounting structure where required by the installation standard. Maintain sufficient rear clearance for connector access, cable routing, thermal dissipation, and service operations. Do not infer the 24 VDC specification from unrelated PanelView Plus 7 models listed in the supplied material. Confirm firmware, runtime software, communication drivers, and application compatibility before commissioning or replacing an installed terminal.