2022-2024 Cummins AMDP HP Tuners Custom Tune Package

Description Fits Year Make Model 2022-2024 Dodge Ram 2500/3500 Pickup w/ 6.7L Cummins Note: This package is for standard trucks equipped with the 68RFE or Aisin transmission. Not compatible with C&C or PTO-equipped trucks. Click Here for C&C trucks. After rigorous testing, AMDP is proud to offer their Custom tuning on the 2022-2024 6.7L Cummins, applied via the HP Tuners MPVI tuning device. This AMDP Custom Tuning will unlock your 5th Gen's true potential, sharpening performance and maximizing efficiency. These tune files range from 0HP Modified to 150HP Race. Still wanting more power? We can have these custom-tune files written to accommodate any modifications your truck may have. Just let us know! Each package includes the necessary equipment to load your custom AMDP tune file. This tune file is compatible with RTD4, MPVI2, MPVI3, and MPVI4 devices, providing a seamless software solution for your 6.7L Cummins. IMPORTANT: This process requires swapping the ECM to a 2019-2021 year model ECM. Please select the ECM Add-on before checking out. We do not support lope tunes or smoke tunes. Includes Package Includes: HPTuners MPVI4 Blank Device (M04-000-00) 2018-2024 Cummins Bypass Cable (BOD18-22BypassCummins) 2022-2024 AMDP 6.7L Cummins Custom Tuning Power Levels Level 1: +45 HP Level 2: +75 HP Level 3: +90 HP Level 4: +120 HP Level 5: +150 HP Notes Standard trucks only (68RFE or Aisin). Not for C&C or PTO models. The latest HP Tuners BETA VCM suite MUST be used. Please update before proceeding. This requires swapping the factory ECM to a 2019-2021 year model ECM. Your ECM Serial Number is found on the middle line of the sticker on the back of the ECM. Some 2023 models equipped with the 6-button cruise control may take longer to build tuning files for. A Bypass cable is required to flash the truck (Included in this bundle). Installation How it works The latest HP Tuners BETA VCM suite MUST be used. (Update before proceeding). Ensure the latest HP Tuners BETA VCM suite is installed on your laptop. With the original ECM installed, pull a stock read with your MPVI device. Email the read to tunes@dirtydieselcustoms.com with your Order Number and the ECM S/N (from the sticker of the new ECM) in the subject line. You will receive your custom tune file via email in 1-2 business days. Disconnect batteries and install the 2019-2021 ECM. Reinstall batteries once the swap is complete. Place the key in the RUN position (engine OFF). Install the bypass cable and plug the MPVI device into the OBD2 port. Open the provided tune file and select WRITE ENTIRE. Once finished, HP Tuners will prompt a key cycle. Turn the key off, then back to the ON position. Do NOT start the engine yet. Leave the key in the ON position for 10 seconds, then start the truck. Installation Instructions: Click here to view MPVI Flashing instructions If you already have the MPVI3 or MPVI4 Device and are just looking for the tune files, click here