B200K5TY15

Introduction •With forward and reverse rotating, start and stop, speed regulation and full speed functions. •RS485 communication, support MODBUS protocol, a variety of communication parameters can be set, easy to connect with various control equipment. •TY15 spring easy-install pump head adopts a quick-installations structure design, flexible upper pressure block, spring roller structure, and convenient and quick tube installation; •Small and compact with an attractive and aesthetically pleasing design •Long service life of tubes; •Quiet operation; •Good mechanical strength and resistance to pollution; •Suitable for small and medium flows; •Suitable for COD and CEMS online monitoring usage; •To facilitate use in ODM (Original Design Manufacturer) support ,it is designed to be compatible with various devices, instruments, and laboratory settings. Pump Parameters Motor Types: 57 stepper motor Power Supply Voltage: DC 24-36V Control Mode: RS485 communication Communication Mode: RTU Communication Address: 1- 16 Communication Rate: 9600 Data Bit: 8 Check Bit: Parity check/No parity check Stop Bit: 1 Speed Range: ≤200rpm Flow Rang: ≤280mL/min Channel Number: 1 Channel Roller Number: 2 rollers Running Direction: Clockwise/Counterclockwise rotation Tube Material: Silicone, Pharmed, A-60-G Tube Installation Method: Tube connector Type of Tube Pressure: Fixed gap Pump Head Shell Material: IXEF Material of Pump Head Roller: PET+PPS Material of Pump Head Pressure Block: PVDF Material of Roller Shaft: S304 Stainless Steel Life Span: ≥1000h Noise: ≤ 60db (testing environment noise ≤40dB, horizontal distance between test product and noise meter is 1 meter) Driver Weight: 0.42Kg (without tube) Dimensions(L*W*H): 137mm*82mm*82mm Wattage: <30W Working Environment: Temperature 0- 40°C, , Relative humidity＜ 80% RH Storage Environment: In a clean and well-ventilated environment with ambient temperatures ranging from -40 to +50°C, and relative humidity not exceeding 95%, the air must not contain corrosive, flammable gases, oil mist, or dust. Applicable Tube Model and Flow Reference Table Model Tube Material Tube No. Flow Rate (mL/min) 1rpm 10rpm 100rpm 200rpm B200K5TY15 Silicone 25# 1.4 14 140 280 The above flow data were all tested using a Lead Fluid silicone tube to pump pure water under laboratory conditions with normal temperature and pressure. This data is for reference only. Due to pressure in actual use , temperature, medium characteristics, tube material and other specific factors, the specific situation needs to consult our engineers. Pump Structure and Use Method Component Names and Functions: 1.TY Pump Head: Attach a tube for liquid transfer; 2. Mounting Plate: This component connects the motor to the pump head and also allows the product to be mounted onto other equipment; 3. Motor: Provides power; 4. Drive Unit: Controls the motor speed and start/stop functions using external analog signals. Usage Method Disassembling the TY15 pump head Step 1: Push the upper pressure plate lock using the direction indicated by the arrow on your finger, then open the upper pressure plate. Step 2: Hold the latches on both sides and move them upward to open the unit, then remove part number 1, the “upper pressure block,” as shown in Figure 3. Step 3: Detach the tube joint as illustrated in Figure 4. InstallTY15 Pump Head Contrary to the order of disassembly Dimension (mm) Application Fields: Environmental Protection, Industry, and More Typical Applications: CEMS