KEF - KW2 RX - Wireless Receiver

KEF KW2 RX Receiver Enjoy more flexible subwoofer placement with the KEF KW2 RX Receiver, a compact wireless adapter designed to connect the KEF XIO Soundbar to a compatible subwoofer without the need for long audio cables. The KW2 receives wireless audio from the XIO Soundbar and sends the signal directly to the subwoofer it is connected to, helping you position your subwoofer where it performs best in the room. This makes it easier to achieve deeper, more balanced bass while keeping your entertainment space neat and cable-free. For KEF subwoofers, the KW2 plugs directly into the rear connection point for a clean and reliable wireless setup. It is compatible with models including KC62, KC92, KF92 and Kube subwoofers. Third-party active subwoofers can also be connected using the Aux/Optical Combo output, giving you added flexibility when building or upgrading your home cinema system. With 2.4 GHz wireless transmission, 24-bit/48 kHz resolution and a maximum line-of-sight range of up to 15 metres from XIO, the KEF KW2 RX Receiver is a simple and effective way to add powerful low-frequency performance to your soundbar setup. Please note: the KW2 RX Receiver is designed for use with the KEF XIO Soundbar and is not compatible with KEF LS Wireless Collection speakers. Key Features Wireless receiver for connecting KEF XIO Soundbar to a subwoofer Helps reduce cable clutter for cleaner home cinema setups Allows more flexible subwoofer placement in the room Compatible with KEF KC62, KC92, KF92 and Kube subwoofers Supports third-party active subwoofers via Aux/Optical Combo output 2.4 GHz wireless connection Frequency response: 20 Hz – 20 kHz Resolution: 24-bit/48 kHz Signal-to-noise ratio: greater than 80 dB Maximum line-of-sight distance: 15 metres from XIO Compact design: 72 x 37 x 31 mm Lightweight 50 g construction USB-C power input for third-party subwoofer use What’s in the Box? KEF KW2 RX Receiver USB-C power cable Optical cable 3.5 mm Aux to RCA cable Screw sets Quick start guide Category Specification Design Three-way bass reflex floorstanding speaker Driver Configuration 3-way Uni-Q Driver Array 19 mm (0.75 in.) vented aluminium dome tweeter with MAT, 100 mm (4 in.) aluminium cone midrange Bass Drivers 2 × 165 mm (6.5 in.) hybrid aluminium cone Crossover Frequency 440 Hz, 2.3 kHz Frequency Range (-6 dB) 39 Hz – 20 kHz Typical In-Room Bass Response (-6 dB) 28 Hz Frequency Response (±3 dB) 46 Hz – 20 kHz Amplifier Requirement 15–200 W Sensitivity 87 dB (2.83V/1m) Harmonic Distortion <2% (35 Hz and above); <1% (38 Hz – 20 kHz) Maximum Output 110 dB Nominal Impedance 4 Ω (minimum 3.2 Ω) Dimensions (H × W × D) 950 × 210 × 315 mm (37.4 × 8.3 × 12.4 in.) Dimensions with Plinth (H × W × D) 1001 × 317 × 315 mm (39.4 × 12.5 × 12.4 in.) Weight 18.4 kg (40.6 lb)