GoPro Knee Mount

This knee mount provides a standard GoPro mount connector that can be strapped to your knee - commonly used on Paragliding SIV courses. The mount can be used with a GoPro or Insta360 with the appropriate adapters. 85x125mm Flexible PETg plastic fits most people Textured underside for better grip Lanyard holes for a backup attachment to the camera Elastic velcro straps included Tested extensively for strength and durability! Not included - GoPro screw/nut for mounting, Insta360 adapter. You can purchase a completed mount here, which we will print for you in your preferred colour. Alternatively, you can print the mount yourself using the files below. As the mount is printed to order, please allow 2-3 business days for shipping. Sizing The mount comes in three sizes to suit those with chunkier or leaner thighs. Measure the width of your leg (straight across) and select the closest size. The mount is slightly flexible and will bend to fit you. For the large size, ~380mm velcro straps are recommended (see link below). For small, ~300mm will be more suitable. If you order here, you will receive both lengths of strap no matter the size you order. Large Medium Small Accessories and spare parts Elastic straps (if you purchase the mount here, these are included in 380mm and 300mm lengths) - https://www.ebay.co.uk/itm/303693329988 Insta360 adapter - https://www.aliexpress.com/item/1005006981071510.html Securing your camera For additional security, you should tie your camera to your harness. This protects against a failure of the mount, screw or camera attachment. Take a spare piece of line and tie it to the camera Pass it through the lanyard holes on the knee mount Make a loop on the end of the line Each time you clip in, pass your leg strap through the loop on the end of the line. This also prevents the camera from slipping down your leg. Print it yourself This design is open hardware, and you can download the files here if you would like to print the mount yourself on a 3D printer. Version 1.3 - Small / Medium / Large Version 1.2 Version 1.1 Version 1.0 Recommended print parameters for optimum strength: 0.15mm layer height, PETg, 60% infill, >5 perimeters, organic supports. Ensure a slight overextrusion to achieve good layer bonding.