Formlabs Resin Washing Solution (5 L)

Formlabs Resin Washing Solution is a non-flammable* solution for cleaning resin off of 3D printed parts. This solution cleans as well as IPA, but can dissolve nearly twice as much resin before becoming saturated. Reduce wash replenishing and cost per washed part with a part-cleaning solution safe enough for any workspace. Formlabs Resin Washing Solution is recommended with Form Wash and Form Wash L. Why Choose Formlabs Resin Washing Solution Stable and Cost-Effective Stable, low-odor chemistry that cleans parts as well as IPA at a lower cost per wash. Validated Non-Flammable Non-flammable per GHS classification, mitigating storage and EH&S concerns. Longer Solution Lifetime Twice the longevity of IPA and minimal evaporation, leading to less frequent top-offs and full changeouts of washing solution. Simplified Sourcing Whether you buy Formlabs or our partners, you can now get your resins and washing solution all in one place. Using Formlabs Resin Washing Solution Utilise the following workflow for best success with Formlabs Resin Washing Solution. *Volume Requirements: Form Wash V2: 3 units (15 litres) Form Wash L: 8 units (40 litres) Step 1Wash Part According to material recommendations.* Step 2Water Soak 30–60 seconds. No agitation required. Soak parts within 8 hours of washing to prevent part swelling. Step 3Accelerated Dry or Air Dry Use compressed air for 30–60 seconds, a fan for 30–120 minutes, or air dry for 4–6 hours. Step 4Cure Part According to material recommendations. Resin Washing Solutions Comparison Solution Fully non - flammable workflow Cost $ / L Saturation Limit Solution amount lost to evaporation* Solution Lifetime* (days) Cost per wash ($USD) IPA No $7.67 10% 1.18 L 97 $1.08 Formlabs Resin Washing Solution Yes $15.00 20% ~ 0 L 240 $0.91 Non-Flammable Competitor Yes $28.00 20% ~ 0 L 240 $1.69 Competitor High-Saturation Limit Solution No - requires secondary flammable solvent $52.50** 35% ~ 0 L 420 $1.81 *Assuming 1 print per day. **Secondary flammable solvent is factored into cost. Compatibility Formlabs Resin Washing Solution is compatible with most non-biocompatible Formlabs Resins. General Purpose Engineering Casting Dental Clear Resin Durable Resin Castable Wax 40 Resin Precision Model Resin Grey Resin Tough 1500 Resin V1 Clear Cast Resin Model Resin White Resin Tough 2000 Resin V1 Black Resin Rigid 4000 Resin Fast Model Resin Rigid 10K Resin Draft Resin High Temp Resin Grey Pro Resin ESD Resin Formlabs Resin Washing Solution is not compatible with the Flexible and Elastic Resin family, or resins that require a validated workflow (biocompatible resin, Flame Retardant Resin, etc.).